intake help!
11-15-2002, 06:58 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
intake help!
i jus got a intake for my 00 civic ex..
okay.. first the intake has two holes but when i removed the stock i had to take out 3 plugs... so which one do i put into the intake
im stuck.. if you can help me.. i would appreciate it
thanks!
okay.. first the intake has two holes but when i removed the stock i had to take out 3 plugs... so which one do i put into the intake
im stuck.. if you can help me.. i would appreciate it thanks!
11-15-2002, 07:21 PM
#2
AARONNOJIMA.COM
Join Date: Aug 2000
Location: Elk Grove, Ca AOL/AI
Posts: 8,559
Likes: 0
Received 0 Likes
on
0 Posts
are you sure the inake you have is for the right year vehicle for one?
sounds like you may have a different year
sounds like you may have a different year
__________________
"Dreaming is how the strong survive....."
"Am I dying to live, or living to die?"
"Dreaming is how the strong survive....."
"Am I dying to live, or living to die?"
11-15-2002, 08:52 PM
#4
のんびり～(´ε｀)
You probably have a 96-98 Civic intake. 96-98 Civics had 2 "holes" in the intake pipe. One for IAT and one for the crankcase breather. 99-00 Civics have the same two, plus an additional sensor. You can always just drill a hole and use a rubber grommet.
11-15-2002, 10:07 PM
#6
のんびり～(´ε｀)
Originally posted by HeavyCivic
you dont have to use the hose that goes to the valve cover
just plug in the O2 sensor and the other hose on ur intake
and put a breather on the valve cover
you dont have to use the hose that goes to the valve cover
just plug in the O2 sensor and the other hose on ur intake
and put a breather on the valve cover
11-15-2002, 11:55 PM
#9
Senior Member
Join Date: Jun 2002
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
I have a '00 EX and came upon your same problem when I got an intake.
1) Air temperature sensor (correct me if I'm wrong)
2) Head breather (correct me if I'm wrong)
3) Another breather tube that originates from somewhere in the block
I couldn't just leave that 3rd hose dangling off in space b/c I didn't know what it's purpose was (still don't). So I bought a small head breather, connected that to the head, and used the nipple on the intake for the unidentified hose.
You could do the same thing, for less than $20, or you can drill and attach another nipple on your intake, amount unknown, and just attach all 3 things like they would go on your stock intake.
1) Air temperature sensor (correct me if I'm wrong)
2) Head breather (correct me if I'm wrong)
3) Another breather tube that originates from somewhere in the block
I couldn't just leave that 3rd hose dangling off in space b/c I didn't know what it's purpose was (still don't). So I bought a small head breather, connected that to the head, and used the nipple on the intake for the unidentified hose.
You could do the same thing, for less than $20, or you can drill and attach another nipple on your intake, amount unknown, and just attach all 3 things like they would go on your stock intake.
