Notices
Track & Autocross Talk lap times and race lines.

Poll: What springs do you run

Thread Tools
 
Old 11-15-2002, 08:30 AM
  #1  
forcedinduction
Member
Thread Starter
 
forcedinduction's Avatar
 
Join Date: Oct 2002
Location: IF, ID
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default Poll: What springs do you run

What springs are you running and how do you like them? Race only or is your set-up streetable? How's the handling, ride, look?

I'll start with mine:
I have just the reg Suspension Techniques kit, and I bought it because it was cheap ($110 brand new). It dropped the car about 1.5" with the rear sitting a tad lower for some reason. Handling is not much better than stock but it retains a stock-like ride, meaning it's not 'bouncy' at all. It works well with the stock struts, but probably needs a strut with a little more compression damping to keep off the bump stops in the big rough stuff. I am pleased with the ride, but willing to sacrifice some of it for better handling.

I guess my point to this post is to get the feel of a better handling set-up.

Oh yea, anyone try those new Teins out yet?
Old 11-15-2002, 09:20 AM
  #2  
CivicSiRacer
Honorary Moderator Alumni
 
CivicSiRacer's Avatar
 
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes on 0 Posts
Default

Running:
Suspension:
- Koni Yellow Sports, Custom Rate Ground Control Coilovers (350f/400r) dropped 2" front, 2" rear, Neuspeed Rear Upper Strut Bar, Neuspeed Rear Lower Strut Bar

Wheels & Tires:
Stock:
15x6" Honda 6 spoke Aluminum Wheels, Kumho VictorRacer 205/50x15" tires

Race Set-Up:
Kosei K1 15x7" (45mm offset), Falken Azenis 205/50x15" tires, racing valve stems, Axas Racing light weight lug nuts, 3mm spacers

Touring Set-Up:
Kosei K1 16x7.5" (43mm offset), Kumho 712s 215/40x16" tires, racing valve stems, racing lug nuts

Daily driving in PA is a bit rough. Handling increased 10 fold compared to Eibach 1" drop spring (of course). Got me several 1st place wins this year.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Old 11-15-2002, 09:25 AM
  #3  
forcedinduction
Member
Thread Starter
 
forcedinduction's Avatar
 
Join Date: Oct 2002
Location: IF, ID
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for your response. Standard Koni yellows with your custom rate GCs?
Old 11-15-2002, 06:38 PM
  #4  
CivicSiRacer
Honorary Moderator Alumni
 
CivicSiRacer's Avatar
 
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally posted by forcedinduction
Thanks for your response. Standard Koni yellows with your custom rate GCs?
Yup.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Old 11-16-2002, 06:24 AM
  #5  
jc836
Senior Member
 
jc836's Avatar
 
Join Date: Jun 2002
Location: Monroeville,PA
Posts: 501
Likes: 0
Received 0 Likes on 0 Posts
Default

CRX-Skunk2 400f/500r on Koni "yellow" shocks.
Civic HB Skunk2 300/400 on Koni "yellow"
Prelude Neuspeed Sport on Koni "yellow"-I prefer the ride quality both road and track
Old 11-16-2002, 09:30 PM
  #6  
rick
not noob?
 
rick's Avatar
 
Join Date: Sep 2002
Posts: 2,613
Likes: 0
Received 0 Likes on 0 Posts
Default

stock spring, stock suspension.

but my stock springs are sgressive enough, i need more agressive shock/struts to match.

I'm going with custom valved bilstein sports
Old 11-16-2002, 09:37 PM
  #7  
Shingoblade-GSR
Hellsing Agency
 
Shingoblade-GSR's Avatar
 
Join Date: Mar 2002
Posts: 1,561
Likes: 0
Received 0 Likes on 0 Posts
Default

GC's - 350F/280R (stock) w/koni yellows.

17" Blang blang Volk LE-37's (14 lbs)
w/RE730s (215/40/17)

Probably going to go the comptech route in terms of sway/strut barz....

Shingo
Old 11-28-2002, 04:49 AM
  #8  
civic44
Junior Member
 
civic44's Avatar
 
Join Date: Nov 2002
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

1988 Hatch: H&R Race, KYB GR-2, decent on the track (some body roll because srpings are progressive) and ok on the street.
Old 12-09-2002, 02:24 PM
  #9  
stephan
:exnbp:
 
stephan's Avatar
 
Join Date: Jul 2001
Location: Henderson, NV
Posts: 8,728
Likes: 0
Received 0 Likes on 0 Posts
Default

01 Civic Neuspeed race+blown stock struts
Old 12-21-2002, 08:01 PM
  #10  
importsyn
Senior Member
 
importsyn's Avatar
 
Join Date: Dec 2002
Location: kitchener ontario canada
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default

In my '93 prelude I run nespeed race springs,suspension techniques sway bars(fr & r),neuspeed upper front tie bar,vibrant rear upper tiebar (along with a custom rear upper tie bar),DC sports rear lower tie bar and KYB AGX shocks in the rear.I'm going to try racing without my front tie bar,I think it makes my handling too neutral.I'll try it and find out.I wish that I would have bought skunk2 or ground control coilovers,even though I love my neuspeeds, I just never thought that I'd get hooked on auto-cross.



All times are GMT -8. The time now is 11:20 AM.