Fuse Keeps Blowing Need HElp
#1
Fuse Keeps Blowing Need HElp
the gauge cluster and running brake lights fuse keeps blowing as soon as i put it in and turn on the lights any ideas or answers to wat it might be need help asap or i cant drive at night
#2
The Comic Guy
Join Date: Jul 2003
Location: Davis, CA
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
I don't know these cars very well but it sounds like a short. Follow the affected wires and look for any short, and if the wires are really tight around any metal brackets or other metal pieces, that is probably where you short is.
#3
Apathy Kills
It's most likely a short.
If you've got a multi tester and some 8 gauge wire, check for continuity between the terminal in the fuse that keeps blowing and the leads on that circuit.
If you don't have the money for a HELMS factory shop manual, get a cheap Haynes manual from your local Kragen/Auto Zone / etc. You'll need it.
If you've got a multi tester and some 8 gauge wire, check for continuity between the terminal in the fuse that keeps blowing and the leads on that circuit.
If you don't have the money for a HELMS factory shop manual, get a cheap Haynes manual from your local Kragen/Auto Zone / etc. You'll need it.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
#4
You can get a PDF version of the helms from: http://www.hondahookup.com/manuals/
(Registration required)
(Registration required)