07 Civic Si sedan short ram intake - Honda-Acura.net

Diablo66 · 07-05-07, 05:28 PM

I bought this short ram intake for my 07 Si sedan. I tried to install it but ran into some trouble, not sure what I was doing wrong and I don't have instructions to refer to. Can anyone help me out?
http://cgi.ebay.com/ebaymotors/ws/eB...4738602&rd=1,1

Registered and logged-in users don't see this ad!
Register your free account today.

sherwood · 07-05-07, 08:15 PM

exactly what is the problem?

R_Squared · 07-05-07, 08:33 PM

I hope this helps:

http://www.kandn.com/instructions/69-1012.pdf

Diablo66 · 07-05-07, 08:46 PM

what i received in the box was 4 clamps, a spacer, the metal intake pipe, a wide rubber hose, and very thing long rupper hose and the filter
the filter fits into one end but if i shake the pipe around in my hand it drops out, im assuming that isnt supposed to happen
the wide rubber pipe properly fits on the other side on the intake and i have a clamp around it
the intake has a spot for the air sensor

im not sure what the thing hose is for
there are two spots on the intake where hoses can go over them but they are both bigger than the hose i received...im thinking that i didnt buy such a great part

FLip wit da Flo · 07-09-07, 09:58 PM

you got what you paid for man..

I got a Fujita SRI and i ran into NO problems at all during the install. I paid $200 shipped for it and i expected good results and i'm happy with what i got. You have to replace the new hoses with the stock ones. Did your intake come with instructions? For a civic Si you shouldn't have bought an intake like this.

Diablo66 · 07-10-07, 07:42 AM

thanks for your help guys...the instructions actually made things easier, i did have the right part i was just doing something wrong...installed it on saturday, the car sounds and drives great....thanks again

tdgsr95 · 07-26-07, 05:55 AM

Quote:

Originally Posted by Diablo66

thanks for your help guys...the instructions actually made things easier, i did have the right part i was just doing something wrong...installed it on saturday, the car sounds and drives great....thanks again

did you really notice any performance difference with the aftermarket intake? maybe a little less power? just curious, because you get a cold-air intake right from the factory. but hey, if all you're looking for is sound then you should be happy.

Diablo66 · 07-26-07, 02:00 PM

Quote:

Originally Posted by tdgsr95

did you really notice any performance difference with the aftermarket intake? maybe a little less power? just curious, because you get a cold-air intake right from the factory. but hey, if all you're looking for is sound then you should be happy.

yea i definitely notice a difference....my friend has an 04 acura tl and whenever we used to drive side by side it would be dead even (from like 0-80) but once i installed the intake my side mirror is by his bumper whenever we race
plus i really like the change in sound, especially at vtec

FLip wit da Flo · 07-29-07, 01:37 PM

Quote:

Originally Posted by Diablo66

yea i definitely notice a difference....my friend has an 04 acura tl and whenever we used to drive side by side it would be dead even (from like 0-80) but once i installed the intake my side mirror is by his bumper whenever we race
plus i really like the change in sound, especially at vtec

vtec and intake =

07-05-07, 08:15 PM	#2
sherwood I missed Sean Join Date: Aug 2004 Location: Fairfield/Bridgeport CT Posts: 10,991	exactly what is the problem? __________________ 1.8L Acura Integra GSR: Back where it belongs. 3.2L Pontiac Tran-sport Montana: that things about to go. 2.2L Honda Accord EX: Sold to my sister 232CI Mercury Sable: Sold to some lady, by my father, while i was on a camping trip. IMM232 http://imagegen.last.fm/minimalDark/..._vigilante.gif

07-05-07, 08:33 PM	#3
R_Squared LEVEL UP Join Date: Sep 2004 Location: Indianapolis Posts: 10,986	I hope this helps: http://www.kandn.com/instructions/69-1012.pdf __________________ 2009 Mazdaspeed3 GT 2007 Civic Si Sedan 1994 Accord EX-L "The Luxo-beater" IMMDC2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-05-07, 08:46 PM	#4
Diablo66 Junior Member Join Date: Jul 2007 Posts: 5	what i received in the box was 4 clamps, a spacer, the metal intake pipe, a wide rubber hose, and very thing long rupper hose and the filter the filter fits into one end but if i shake the pipe around in my hand it drops out, im assuming that isnt supposed to happen the wide rubber pipe properly fits on the other side on the intake and i have a clamp around it the intake has a spot for the air sensor im not sure what the thing hose is for there are two spots on the intake where hoses can go over them but they are both bigger than the hose i received...im thinking that i didnt buy such a great part

07-09-07, 09:58 PM	#5
FLip wit da Flo Senior Member Join Date: Jan 2004 Location: NJ Posts: 200	you got what you paid for man.. I got a Fujita SRI and i ran into NO problems at all during the install. I paid $200 shipped for it and i expected good results and i'm happy with what i got. You have to replace the new hoses with the stock ones. Did your intake come with instructions? For a civic Si you shouldn't have bought an intake like this.

07-10-07, 07:42 AM	#6
Diablo66 Junior Member Join Date: Jul 2007 Posts: 5	thanks for your help guys...the instructions actually made things easier, i did have the right part i was just doing something wrong...installed it on saturday, the car sounds and drives great....thanks again