need info on head studs.. i got screwed
#1
Registered User
Thread Starter
Join Date: Feb 2004
Posts: 2,629
Likes: 0
Received 0 Likes
on
0 Posts
need info on head studs.. i got screwed
so.... for 80 bucks like 4 months ago on ebay i bought d16y8 head studs for my mini me swap onto my d15b8....
now i finaly tried them out and they're too short, the rod comes up flush so i cant get the fastening bolt on... so d15 studs are different than d16?
now i finaly tried them out and they're too short, the rod comes up flush so i cant get the fastening bolt on... so d15 studs are different than d16?
#3
turning u inside out
Join Date: Oct 2003
Location: cortland, ohio
Posts: 2,545
Likes: 0
Received 0 Likes
on
0 Posts
id just sell the ones you have and contact an arp dealer on hondatech. im sure theyd know exactly what you need. i think the height on dseries heads are all the same, but the d15 may go deeper in to the block.
#5
turning u inside out
Join Date: Oct 2003
Location: cortland, ohio
Posts: 2,545
Likes: 0
Received 0 Likes
on
0 Posts
did u check with golden eagle? i would just get all the dimensions from a stock honda bolt and then contact arp and see if they have that. there might be some other motor or something that is identical to that bolt. ive had to do it for a customer