mad....ugh
11-15-2006, 05:19 PM
#1
Ridin Dirty
Thread Starter
Join Date: May 2002
Location: Charlotte,NC
Posts: 3,839
Likes: 0
Received 0 Likes
on
0 Posts
mad....ugh
I recently bought a 92si and....nothin freakin works...the gauge cluster won't work (the lights do)....there is a water temp gauge and a fuel gauge on the A-pillar which don't even have wires.....the blinkers don't work and there is some more stuff but that doesn't matter....alright question is
how do I get those gauges on the A-pillar workin? (how do I wire them etc)..they are stewart warner gauges if that helps
what do you think needs to be done about the gauge cluster?..what should I check for?
thanks in advance and I am sure I will have more questions soon...
h:
how do I get those gauges on the A-pillar workin? (how do I wire them etc)..they are stewart warner gauges if that helps
what do you think needs to be done about the gauge cluster?..what should I check for?
thanks in advance and I am sure I will have more questions soon...
h:
Last edited by FLAT_LINER; 11-16-2006 at 05:39 PM.
11-15-2006, 05:38 PM
#3
Ridin Dirty
Thread Starter
Join Date: May 2002
Location: Charlotte,NC
Posts: 3,839
Likes: 0
Received 0 Likes
on
0 Posts
11-15-2006, 05:58 PM
#4
Ridin Dirty
Thread Starter
Join Date: May 2002
Location: Charlotte,NC
Posts: 3,839
Likes: 0
Received 0 Likes
on
0 Posts
ok nevermind...I am taking the A-pillar off.....the question is
where should I start with the gauge cluster?...would buying a new one be the best idea?
where should I start with the gauge cluster?...would buying a new one be the best idea?
11-16-2006, 12:30 PM
#6
Ridin Dirty
Thread Starter
Join Date: May 2002
Location: Charlotte,NC
Posts: 3,839
Likes: 0
Received 0 Likes
on
0 Posts
well I got a power tester light....and apparently there isn't any power getting through there....BUT..the weird thing is...if I plug in everything and turn my lights on etc...they light up....idk I am so confused and I need some help 
11-16-2006, 01:37 PM
#7
Power by Uncle Ben's Rice
Join Date: Sep 2006
Location: Upstate NY
Posts: 1,343
Likes: 0
Received 0 Likes
on
0 Posts
check your speed sensor. My cluster didn't work, I made big fuck up...when I did my swap, the plug that goes onto the evap canister is EXACTLY like the one that goes onto the top of the tranny for the speed sensor. Well except the wire colors of course but my wires had grease all over them and didn't bother to clean them off...hope this helps.
Maybe check continuity between the wires
maybe broken wire
Maybe check continuity between the wires
maybe broken wire
11-16-2006, 03:54 PM
#8
Ridin Dirty
Thread Starter
Join Date: May 2002
Location: Charlotte,NC
Posts: 3,839
Likes: 0
Received 0 Likes
on
0 Posts
check your speed sensor. My cluster didn't work, I made big fuck up...when I did my swap, the plug that goes onto the evap canister is EXACTLY like the one that goes onto the top of the tranny for the speed sensor. Well except the wire colors of course but my wires had grease all over them and didn't bother to clean them off...hope this helps.
Maybe check continuity between the wires maybe broken wire
Maybe check continuity between the wires
maybe broken wire
11-17-2006, 12:45 AM
#10
v-card member alpha
Join Date: Oct 2006
Location: Assplosion, NE
Posts: 4,010
Likes: 0
Received 0 Likes
on
0 Posts
Stupid Q: could the cluster prob. be b/c of a bad fuse?
As for that noise, if you hear it with the power on but engine off as well as with the engine running it could be the ABS pump building pressure... hard to say without hearing the noise.
As for that noise, if you hear it with the power on but engine off as well as with the engine running it could be the ABS pump building pressure... hard to say without hearing the noise.
