Who wants to see my baby CiViC!!!
10-30-2006, 01:26 AM
#1
Civic007
Thread Starter
Join Date: Aug 2006
Location: Melbourne, Australia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Who wants to see my baby CiViC!!!
Hey ya guys, Ive attached some photos of my civic and how ive made it look from stock if you know how they look from the start to this 
... Tell me what you think 
and if you recommend anything i should do
Also, can you guys give me some opinions about enhancing engine bay... Like i was thinking of adding aliminum pipe and a KnN air filter with heat shield - would that make any difference or just noise!!! Its a Vti Engine so what could i do thats simple but also good... Thanks.
... Tell me what you think and if you recommend anything i should doAlso, can you guys give me some opinions about enhancing engine bay... Like i was thinking of adding aliminum pipe and a KnN air filter with heat shield - would that make any difference or just noise!!! Its a Vti Engine so what could i do thats simple but also good... Thanks.
Last edited by Bravo007; 10-30-2006 at 01:29 AM. Reason: adding more pictures
10-30-2006, 05:54 AM
#2
Your Powder Coater
Join Date: Mar 2004
Location: Girard, Ohio
Posts: 4,463
Likes: 0
Received 0 Likes
on
0 Posts
Hey ya guys, Ive attached some photos of my civic and how ive made it look from stock if you know how they look from the start to this ... Tell me what you think and if you recommend anything i should do
Also, can you guys give me some opinions about enhancing engine bay... Like i was thinking of adding aliminum pipe and a KnN air filter with heat shield - would that make any difference or just noise!!! Its a Vti Engine so what could i do thats simple but also good... Thanks.
... Tell me what you think and if you recommend anything i should doAlso, can you guys give me some opinions about enhancing engine bay... Like i was thinking of adding aliminum pipe and a KnN air filter with heat shield - would that make any difference or just noise!!! Its a Vti Engine so what could i do thats simple but also good... Thanks.
not really diggin the rims or the eye lids.... or the unpainted grill... just not my style i guess. As far as what you could do to the engine bay.. put a turbo in there! that will look nice!
10-30-2006, 07:16 AM
#3
Junior Member
Join Date: Mar 2006
Location: Holmdel, NJ
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
x2
In my opinion, some Simple Green and/or Engine Brite will make your engine bay look good, but then again, I like the stock look compared to a car riddled with colorful aftermarket parts. It's all personal preference.
The short ram will mostly just add noise.
In my opinion, some Simple Green and/or Engine Brite will make your engine bay look good, but then again, I like the stock look compared to a car riddled with colorful aftermarket parts. It's all personal preference.
The short ram will mostly just add noise.
10-30-2006, 02:15 PM
#6
Civic007
Thread Starter
Join Date: Aug 2006
Location: Melbourne, Australia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
... The rims i have got a lot of compliments about but now im starting to hate the eyelids and wish i left it original there and i will be painting the grill soon to match the car... going back to amber and all that is way too stock but then again as you guys said, its personal preference!!!Thanks for the opinions though
10-30-2006, 02:19 PM
#8
Civic007
Thread Starter
Join Date: Aug 2006
Location: Melbourne, Australia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
P.S. Its been lowered with king springs on it
10-30-2006, 03:01 PM
#9
12:00AM Atlanta time...
Join Date: Mar 2005
Location: Prince Edward Island
Posts: 2,561
Likes: 0
Received 0 Likes
on
0 Posts
Hey I used to run the same 4 dr civic... color and all. I really do like the look of it... minus the headlight eyelids. And I second a turbo for dressing up an engine bay. Looks even better if it is functional!
