about distrubutor rotor
10-25-2006, 11:40 AM
#1
da ghost
Thread Starter
Join Date: Aug 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
about distrubutor rotor
i had to replace my distrubutor cap with a new one and a new rotor problem is my rotor is not comming off and i heard it just easily pop off anybody have any ideas also i did unscrew the screw thats on the distributor rotor
10-25-2006, 12:07 PM
#4
Your Powder Coater
Join Date: Mar 2004
Location: Girard, Ohio
Posts: 4,463
Likes: 0
Received 0 Likes
on
0 Posts
may as well use a screw driver at the base & see if u can get it to break free. don't pry on the part that sticks out, you'll probly crack that. Worst case senerio is you'll destry it & have to get a new one anyways.
just don't jack up the dizzy to bad!
just don't jack up the dizzy to bad!