i need some new light bulbs
10-05-2006, 12:50 PM
#1
**hOnDaFrEaK**
Thread Starter
Join Date: Oct 2006
Location: Bentonville, Arkansas
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
i need some new light bulbs
i need some new light bulbs for my heat and air console but i cant figure out how to get it out without breaking or somethingcar3.bmp
10-05-2006, 12:59 PM
#3
**hOnDaFrEaK**
Thread Starter
Join Date: Oct 2006
Location: Bentonville, Arkansas
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
10-07-2006, 08:37 AM
#6
Platinum Member
Join Date: Jun 2006
Location: cardboard box
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
no it doesn't pop off!!!! The Honda dashboard is one of the most misterious components in a Honda. J/k. It's a real pain in the ass to take off and you really should take a look at the manual and find those bolts unless you want really nice lights and a cracked dash.
10-07-2006, 11:20 AM
#7
Honorary Moderator Alumni
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes
on
0 Posts
And there are clips that break so easily.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
10-07-2006, 12:18 PM
#8
1337 h4x0r
Join Date: Jul 2006
Location: New Hampshire
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
according to haynes it's something like a 5 hour job and includes removing the seat(s), i believe. I'm in the same position as you and have been putting it off indefinitely for that very reason
10-19-2006, 04:41 PM
#10
Member
Join Date: Aug 2006
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Listen I did mine recently.
This is I did it:
1. I took my stereo out completely(unit & Housing)
2. There was 2 or 3 screws underneath the temp control unit
3. I removed them with an angled screw driver
4. After doing so the whole unit (temp control) came foward
5. Finally I just removed the bulbs (2) and replaced them
This is I did it:
1. I took my stereo out completely(unit & Housing)
2. There was 2 or 3 screws underneath the temp control unit
3. I removed them with an angled screw driver
4. After doing so the whole unit (temp control) came foward
5. Finally I just removed the bulbs (2) and replaced them