what do you think I could get for my gsr?
08-30-2006, 09:56 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2006
Location: socal
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
what do you think I could get for my gsr?
95 black gsr.
miles- 110xxx on car
motor rebuilt in march 06(top and bottom)
rebuilt tranny in march 06
act cluch and flywheel
tein suspention put on in march 06 (master flex)
all strut tower bars (F/R)
carbin rear tie bar
new tires about 10,000 miles ago
rear brake pads and rotors in feb 06
front brake pads, dirlld and sloted rotors in june 06
vis oem carbon fiber hood
while all the normal things were replaced they put in: all new gasket,seal,water pump,oil pump timing belt, all new hoses...ect. also had these put in-
Itr pistons (usdm)standerd
stage 2 cams from blox
skunk 2 valve springs and retainers
skunk 2 valves
skunk 2 ajust cam gears
aem intake
aem power pullys
dc 4-1 header
tanabee catback exhaust
blox IM
62mm TB
B&M FPR
ericks racing ecu chip (ericksracing.com)
since all the work the motor has 11,000 miles on it. This is a gsr so It's got the leather inter, cd, power everything and ect... I dont want to sell it to cheap and want to know what you think. Have to sell soon, I got a new job and am putting to meny miles on it.
any input would be thankful, thanks for your thoughts.
miles- 110xxx on car
motor rebuilt in march 06(top and bottom)
rebuilt tranny in march 06
act cluch and flywheel
tein suspention put on in march 06 (master flex)
all strut tower bars (F/R)
carbin rear tie bar
new tires about 10,000 miles ago
rear brake pads and rotors in feb 06
front brake pads, dirlld and sloted rotors in june 06
vis oem carbon fiber hood
while all the normal things were replaced they put in: all new gasket,seal,water pump,oil pump timing belt, all new hoses...ect. also had these put in-
Itr pistons (usdm)standerd
stage 2 cams from blox
skunk 2 valve springs and retainers
skunk 2 valves
skunk 2 ajust cam gears
aem intake
aem power pullys
dc 4-1 header
tanabee catback exhaust
blox IM
62mm TB
B&M FPR
ericks racing ecu chip (ericksracing.com)
since all the work the motor has 11,000 miles on it. This is a gsr so It's got the leather inter, cd, power everything and ect... I dont want to sell it to cheap and want to know what you think. Have to sell soon, I got a new job and am putting to meny miles on it.
any input would be thankful, thanks for your thoughts.
Last edited by flybye; 08-31-2006 at 10:35 AM.
09-02-2006, 04:29 PM
#6
JDM Honda Masta
Join Date: Sep 2006
Location: GA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
with you current setup you should expect to get about $6500-$8000 depending on the condition of the paint, body, and interior, which I cant judge since there are no pics... remember its a 11 year old car that wasnt but about $18.5k new.
09-03-2006, 12:09 AM
#8
Senior Member
Thread Starter
Join Date: Jan 2006
Location: socal
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
the body is stright, paint is good, the paint on the hood was oxadized thats why I got the carbon fiber. interior is 11 years old and has the minor leather cracking but the back seem like they have never been sat in.do you know how to post pics I havent figured it out yet.
