Triple Guage Pod...weewt!
#1
Triple Guage Pod...weewt!
http://www.2amracing.com/Guage%20Pod.JPG
http://www.2amracing.com/INCARpod1.JPG
http://www.2amracing.com/interiorturbo.JPG
http://www.2amracing.com/Parts/gaugepb.jpg
http://www.2amracing.com/Parts/gaugepa.jpg
Cordless Drill
2.25 Bore Bit
Swiss army Tool(knife)
180 Pvc(blk)
90 Pvc(blk){homedepot}
Cut 2.25 hole in center of 180 piece and insert the 90 piece. fine tune the fit with a utility tool or knife. Drill two small holes directly behind the fittins for the guages(for mech gauges)..I opted for a mid sized drill bit for the holes. I cleaned up the back using vinyl electric tape and the cluster sits snug on the dash by way of velcro. The wires/tubes are run thru a hole drilled in the defrost vent on the dash.
Total cost if you own the tools...3.85
fyi...i dont think I spelled gauge correctly even once in the title or entire thread
http://www.2amracing.com/INCARpod1.JPG
http://www.2amracing.com/interiorturbo.JPG
http://www.2amracing.com/Parts/gaugepb.jpg
http://www.2amracing.com/Parts/gaugepa.jpg
Cordless Drill
2.25 Bore Bit
Swiss army Tool(knife)
180 Pvc(blk)
90 Pvc(blk){homedepot}
Cut 2.25 hole in center of 180 piece and insert the 90 piece. fine tune the fit with a utility tool or knife. Drill two small holes directly behind the fittins for the guages(for mech gauges)..I opted for a mid sized drill bit for the holes. I cleaned up the back using vinyl electric tape and the cluster sits snug on the dash by way of velcro. The wires/tubes are run thru a hole drilled in the defrost vent on the dash.
Total cost if you own the tools...3.85
fyi...i dont think I spelled gauge correctly even once in the title or entire thread
#6
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by f22b1sedan
Double post ...but...another sleeper(sorta GSR<accord Ex)but none the less...nice ride ...very cool
#7
i'd have to give you points in the creative department. cant say the same for aesthetics
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
#8
Originally Posted by Shmoo
What is that supposed to mean?
#10
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by f22b1sedan
I see a gsr and ussually figure that it has a few mods and is probably quick if not fast. I just consider my car a little grocery mom car. there was no insult in the statement. Very nice car...just attempting to compliment