deity0723

I bought JL 6x9 speakers (rear deck) for my 99 accord coupe. I had another thread where some people told me the speakers wouldnt fit because the trunk spring(?) would get in the way of the speaker. they told me to buy spacers for my speakers and so i just bought 2- 1 1/2 in. 6x9 speaker spacers. do i need anything else for the installation? i remember when i changed my head unit i needed a wiring harness... do i need the same thing for my speaker? if so can u post a link to what i need so i can buy it...thanks alot, again

btw: speakers are currently stock

Misa

you can get mating harnesses.... or you can just cut off the existing one... its only 2 wires

deity0723

i did a search but cant find a DIY to help me maybe someone can post it here?
thnx in advance

e3NiNe

http://www.crutchfield.com/S-ulQApK1...asp?i=12071012



Circuit City, Best Buy ... these stores should have these for sale in the installation center.

deity0723

so is that a must have for installation (low on $$$)

e3NiNe

they're $7 a set.

You can cut your stock harness, but for $7 ... don't supersize for a week and you'll be fine.

Nors

On the stock harness does anyone know which color is postive/negative.

hondaboy98

just cut the stock harness and use some good connectors with a little shrink tubing, and itll sound fine.

scotttharobot

I had no idea... all I did was chop off the stock harness, and hooked up the wires to speaker terminals, and made sure they were in phase (speaker bumps outward with the bass hiits instead of inward), and then just hooked them up when they were right...

JHemenway

Apologies for reviving an older thread, but which model (TR or VR) did you use, and how did the installation go?