Integra TV!?!?!
03-04-2006, 05:45 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Integra TV!?!?!
Hey guys, i was wondering if i were to put a flip up tv (motorized one) would there be enough clearence?
or
could i mount it on the bottom "din" so there would be a whole on top of it?
thanks
~Matt
or
could i mount it on the bottom "din" so there would be a whole on top of it?
thanks
~Matt
03-04-2006, 12:20 PM
#2
Member
Join Date: Jan 2006
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking of doing the same thing, but i can't find a screen that i like yet. Mounting it on the bottom should give you enough clearance. If not just fold it down when u need to adjust something
03-04-2006, 01:06 PM
#3
Senior Member
Join Date: Jan 2006
Location: Wisconsin
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
i would recommend the eclipse 5435 double din audio video navigation it goes in flush or you can tilt it i was thinking about getting a motorized one but i ddin't want to have to move it everytime i wanted to adjust somehting with the heat/air
03-05-2006, 07:01 AM
#4
Member
Join Date: Dec 2005
Location: VA beach
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
You can use any motorized indash. Just flip the mounting bracket, plastic piece, upside down. It will block the heater/ac controls. You get use to it after a little bit. You do need to wacth your shifter clearance. Mine clears by a inch. I have the stock knob and B&M short throw. Have fun you'll love it.
03-05-2006, 11:36 AM
#5
Apathy Kills
Moved to Audio & Security. 
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!