Vtec
12-04-2007, 01:44 PM
#1
Former Dsmer
Thread Starter
Join Date: Oct 2007
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Vtec
OK i so i have this friend who has a bunch of cones so we doing some time autox and as i was cornering hard my vtec would cut out and when i straightened out my vtec would come back my oil level is fine could it be the pressure?
12-04-2007, 05:30 PM
#3
lots and lots of fail
Join Date: Dec 1999
Location: Deeeeeeeeeeeeeeetroit
Posts: 23,004
Likes: 0
Received 1 Like
on
1 Post
It's because the system didn't have enough oil pressure to active the VTEC changeover. This may be caused by improper technique and/or the shitty factory oil pump.
12-05-2007, 04:42 PM
#5
Senior Member
Join Date: Nov 2006
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
how do u know ur vtec was going off? do u have a vtec light hooked up?
One reason that i can think off is that whne u corner hard, all the oil in ur oil pan would move to one side not letting oil pump suck in enough oil, and not pushing enough oil through the vtec selonoid.
One reason that i can think off is that whne u corner hard, all the oil in ur oil pan would move to one side not letting oil pump suck in enough oil, and not pushing enough oil through the vtec selonoid.
