do cam gears make a big difference or not?
#21
Registered User
Join Date: Jan 2003
Location: Utah
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by InfiniteVTec
Cam Gears make a big difference... a 2 degree adjustment which is 1 mark on the AEM cam gear, net me 15-17ft/lbs torque gains from 2-4,500rpm.
#22
Senior Member
Join Date: Dec 2005
Location: Racine, Wisconsin
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by InfiniteVTec
Cam Gears make a big difference... a 2 degree adjustment which is 1 mark on the AEM cam gear, net me 15-17ft/lbs torque gains from 2-4,500rpm.
#23
Senior Member
Join Date: Jul 2005
Location: topton,pa
Posts: 2,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by InfiniteVTec
Cam Gears make a big difference... a 2 degree adjustment which is 1 mark on the AEM cam gear, net me 15-17ft/lbs torque gains from 2-4,500rpm.
#24
Originally Posted by bambbrose
boosted correct?
#25
Originally Posted by waaBAAH
yes...but what other mods do you have done? on a stock motor (even i/h/e) i doubt you could gain 15 hp.
#27
Senior Member
Join Date: Dec 2005
Location: Racine, Wisconsin
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by InfiniteVTec
Zex Stage 2 Cam, valve springs n retainers, Skunk2 IM, 4-2-1 DC Sports Header, Fireball Cat-back exhaust, and AEM CAI
(even i/h/e) i doubt you would get that high of numbers from a cam gear...your cam really helped those numbers i think
#28
Originally Posted by waaBAAH
so it is diffrent for you....you have mods done but on a bone stock
(even i/h/e) i doubt you would get that high of numbers from a cam gear...your cam really helped those numbers i think
(even i/h/e) i doubt you would get that high of numbers from a cam gear...your cam really helped those numbers i think
on an SOHC, cam gears should be used with a upgraded camshaft. on DOHC cam gears would work with stock cams, but you won't gain much unless you're going with new cams.
I'm going to try visiting the shop to see if i can take pics of the various runs I did with different cam gear adjustments, just for referrence to this question.
Last edited by InfiniteVTec; 01-31-2006 at 09:17 PM.