Plz help! Manual pedal conversion
#1
Plz help! Manual pedal conversion
Hey i'm doing a manual pedal swap into my integra cause i'm putting in an h22 and it's currently an automatic LS. Anyways, could anyone please, please tell me how I can easily remove the current pedals and install the new ones. It seams very hard because there's so much in the way I can barely get at them. Any help would be greatly appreciated. Thx!
#4
Well On my teg all I did was ad the clutch pedal and cut the brake. But there is one nut and bolt holding the brake pedal all the way on top remove it and all the other little crap and it should come down.
#5
Originally Posted by honura
Well On my teg all I did was ad the clutch pedal and cut the brake. But there is one nut and bolt holding the brake pedal all the way on top remove it and all the other little crap and it should come down.
#6
Originally Posted by JasonST
Thanks alot honura, the only other info i found was a guy saying you have to drop the steering column and take out the dash and stuff:crazyr: .
Ehh that might be true about the colum but not the dash. hehe Just cut the auto brake much easier.