EddieJP125

Motegi Racing MR7's Hyper Black 17x7" +42mm offset, part number 20777716. The bolt pattern is 4x100 and 4x114.3.


I know alot of people would not like the choice of 17's...but i might be putting on for my CL first...so than i need to know if it transfer over to the Integra?...
1. Would these bolt patterns fit?
2. Is motegi a good brand?
3. And what tire size would i need?
Damn alot of quesitons but i need to make sure i do everything right with these 17" rims...
Thanks

JoePoonani

oh geez the MR7s, they are probebly one of the most played out rims ever. dont buy them.
they wont work on the CL because the CL has a 4x114 bolt pattern and the integra has 4x100.
on your teg you would need 205/40/17 tires. if i were you id get a set of 16 inch rims with 205/45/16

dubcac

If you read his post, you'd see that it's a dual 4 bolt pattern...one set is 4x100, one is 4x114.3. They will fit the integra, and the tire size should be 205/40/17...any bigger in width or aspect ratio and you will rub.

JoePoonani

oh shat sorry i didnt read it....oops!

SP00NFed

yeah they'll fit, i was wondering what Joe was talking about saying no :chuckles:

JoePoonani

reading > meh :happysad:

EddieJP125

i figure they look good and their a great price...so which bolt pattern should i get?
4X100or 4x114.3

EddieJP125

i'm also finding out that the Motegis suck...so wat do u guys think about the Konig Imagine?

dubcac

Konigs suck too

shirley

wait a sec...if u have to choose one or the other bolt pattern then these rims will not fit the cl and the teg. i believe the prior posters had assumed that the rims had both the 4x100 and 4x114.3 pattern on it. at least that is what i was assuming.now your saying you have to choose between the two patterns. which is it?