PunkAssKidThe1s

How hard is it to install your own engine (bolt-on and play such as H22 in an Accord)? I'm not exactly the best mechanic - hell, I went to a shop to have my header put on, but I want to learn, and one of my uncles had to fork out $1,000 for a new engine to be installed into his Subbie!

So, how hard it is and what tools outside of the standard nuts/bolts/screws/drivers/wrenches would I need for this??

Thanks!

PunkAssKidThe1s

Oh, yes, and same question for tranny... Afterall, I've got an AT matted to an F22 in my Accord SE (97)...

97civicEXVTEC

air tools is a must..

if you cant install your own header, i would do a lot more research before you take on something like that..

Altern8r

ye i agree with 97civic*** as it is a lot more complicated than a header. that is simple.

96HawkCnvt

It's really not that difficult to do stuff like that and I'd encourage you to give it a try. But as others have pointed out, there is a lot more to it than just installing a header. My suggestion is to find some guys locally that you know you can trust and see if you can get some help with it. You'll learn a lot if you aren't afraid to give stuff a try. Just be smart about it so you don't cost yourself a lot or end up with a safety issue etc.

Good luck!

Todd

goldex420

installin a header takes 10 min a engine 4 hrs or so if u know what ur doing and ive done plenty its quite a job and i KNOW ur not ready

willpower101

To swap an engine? I don't think so. Tons of people do this job with standard tools, and the saying that they are a "must" is simply misinformation.

Besides standard tools and a ball joint separator the only other thing that makes the job much easier is an electric impact wrench.

donta

How hard is it to install a tranny in a 95 Accord. I need to get step by step instruction as to how it should be done.

marvinp8700

Haynes manual

jrgoswick

I recently assisted Specialty Performance in Rogers Arkansas install a KillerB into a Civic. Took about 2 hours for the motor AND tranny! It is a lot of work. The ONLY thing I can't say enough-MAKE SURE YOU'VE GOT THE RIGHT TOOLS FOR THE JOB!