GSR In EG
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Maryland
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
GSR In EG
Ok now i no this has been asked and answered plenty of times. But im pretty sure that evething form a 3rd gen integra will bolt up in a eg. Now my problem is wiring issues i have a CX hatch. it comes with a 1.5 liter POS now the main harness thats connected to the car. will that have to be modifed for the GSR engine harness to connect. or what im counfused I no that plenty of people have b16 and gsr swaps in there eg's now coudl you answer me and tell me what i should do. i have the OBD1 to OBD2 conversion harness so that woult be a problem. could you help thanks.
#4
Originally Posted by b18c1_hatch
because im getting the motor for 1500 bucks and its out of a 97 GSR.
OBD is all in the ECU, injectors, dizzy....it isnt the motor.......If you wanna make life super easy, re-use your obd1 harness from the EG on the GSR motor.....sell your obd2 dizzy, injectors, ecu and buy obd1 equals...the price will offset so it doesnt cost anything....sell your conversion harness....OBD1 >>>> OBD2
#6
Originally Posted by b20hatchy
get a obd 1 dizzy and some obd 1 sensors. get the gsr wiring harness and call it good.
#7
If its modified yes you can but its easier to use the gsr harness. I said easier not cheaper. and yes you dont need the sensors i forgot that there the same but the dizzy is going to be needed to swap to obd1.
#8
Pull my finger
Join Date: Apr 2004
Location: Arizona
Posts: 41,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by b20hatchy
If its modified yes you can but its easier to use the gsr harness. I said easier not cheaper. and yes you dont need the sensors i forgot that there the same but the dizzy is going to be needed to swap to obd1.
and civci2scooby said everything i was going to state so yeah thats about it from me... i was wondering the exact same thing why u would want an OBD2 setup on a OBD1 car... h: