Nsx Wheels
10-22-2005, 05:46 PM
#1
theh0wie
Thread Starter
Join Date: Oct 2005
Location: houston
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Nsx Wheels
hi guys im jus curious. but the wheels for the 03-05 nsx front.... correct me if im wrong but i thinks its 17x7. now how much would 4 cost and where could i get some?
10-24-2005, 08:59 AM
#2
Moderator
Join Date: Mar 2001
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by theh0wie
hi guys im jus curious. but the wheels for the 03-05 nsx front.... correct me if im wrong but i thinks its 17x7.
Originally Posted by theh0wie
how much would 4 cost and where could i get some?
Of course, if you look around, you can find them discounted, so you can buy four of them for "only" 
five grand or so.Even aside from the cost, they won't be a good fit for other Honda/Acura models, for various reasons. For example, the 5x114.3 bolt pattern is only used on certain cars, and the 55 mm offset may be a problem, too. Furthermore, the center bore of the NSX front wheels is 70 mm, whereas other H/A model cars that use 5x114.3 lugs (e.g. Integra Type R) need wheels with a center bore of 64 mm (and it is virtually impossible to find hubcentric rings for OEM wheels).
Last edited by nsxtasy; 10-24-2005 at 09:02 AM.
11-02-2005, 10:35 AM
#5
Moderator
Join Date: Mar 2001
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sonicrex
The front wheels are 17x7 and the rears are 17x9
Give a man a fish, and he'll be hungry the next day. Teach a man to fish, and he'll never be hungry again...
11-02-2005, 04:17 PM
#7
Moderator
Join Date: Mar 2001
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lude-Smakt
the difference between front wheel drive and rear wheel drive may be a compatibility issue as well
I realize that FWD cars sometimes have wheels with more positive offset (or less negative offset) than RWD cars, but since the NSX wheels have more positive offset than those on most FWD cars, I don't understand how even that is a factor.
