what gas should i use
10-12-2005, 07:02 AM
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: queens,ny
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
what gas should i use
i was wondering,before i acually complete my ls/vtec build, i am using PCT pistons(JDM),and with the head i will be using i will have sumwhere around 12.3ish:1 compression ratio. i was just wondering if anybody had any suggestion on what fuel i should use, the closes gas stations around me get up to only 93 octane, and i don't think that will halep run my setup good???what can i mix or use to help??? thanks
10-12-2005, 08:53 AM
#3
Registered User
Thread Starter
Join Date: Jun 2005
Location: queens,ny
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by qtiger
93 can run PCTs on good tuning. If you aren't 100% confident in your tuner then I would use p73-00 pistons.
do you know some stuff that is taken into consideration when making that PCT and 93 octane work,or a site where i can look up this stuff??? also does anybody know the diameter of those wrist pins for those pistons???
10-13-2005, 06:21 PM
#4
Registered User
Thread Starter
Join Date: Jun 2005
Location: queens,ny
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
can i use ethanol as a octane booster? and if so how can i find out how much 2 use 2 boost it up 2 my desired octane, i am aware that gasonline has about 15% ethanol???thanks
10-13-2005, 07:19 PM
#5
Senior Member
Join Date: Dec 2004
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
10-13-2005, 08:33 PM
#6
Registered User
Thread Starter
Join Date: Jun 2005
Location: queens,ny
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by b16ahybrid