zc auto tranny torque convertor not locking up!!!
#1
zc auto tranny torque convertor not locking up!!!
currently i'm running a dohc zc & zc auto tranny w/ auto zc ecu in '88 lx. the problem is the lock up solenoid valves not locking up at speed (i have the no. 19 engine code, & hardware wise, everything is operational - only thing i don't know is if the ecu is effed!!!). i'm wondering if the original zc tranny had a tcu to control the solenoids (i see that the prelude & accord had a tcu to control the tranny)?!?
since the torque converter is not locking up at highway speeds, i'm getting low gas mileage & also the big thing is overheating since the tranny is putting too much heat into the cooling system. i had to put an external cooler for the tranny to by pass the radiator to eliminate overheating the engine!!!!
any feedback is appreciated...
since the torque converter is not locking up at highway speeds, i'm getting low gas mileage & also the big thing is overheating since the tranny is putting too much heat into the cooling system. i had to put an external cooler for the tranny to by pass the radiator to eliminate overheating the engine!!!!
any feedback is appreciated...