Swapping a b18c into an ls teg
09-07-2005, 09:54 PM
#1
Certified Rice-Rocket
Thread Starter
Join Date: Sep 2004
Location: washington
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Swapping a b18c into an ls teg
OK just bought a jdm gsr obd1 longblock yesterday. I am going to be swapping it into my obd2 LS. What am i going to have to do in terms or harness and getting vtec to engage properly. Can i use my obd2 ls harness? i need a way to engage vtec, knock sensor, etc. I'm running an obd1 p75 and obd2-1 harness at the moment. p72 is on its way and is obd1. What do i need to do this swap ? HELP!
09-08-2005, 10:50 AM
#5
Apathy Kills
You'll need a OBD-1 to OBD-2 conversion harness.
Boomslang Fabrication makes them, as well as other manufacturers.
Moved to Hybrid forum.
This thread explains why.
Boomslang Fabrication makes them, as well as other manufacturers.
Moved to Hybrid forum.
This thread explains why.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!