B18 shift points
#1
Senior Member
Thread Starter
Join Date: Jul 2005
Location: Delaware, Ohio
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
B18 shift points
i'm putting in an aftermarket tach, since my stocker redlines @ like 6600 or so. i'm gonna put in an autometer Cobalt 10,000 rpm tach. where should i set the shift point for the shift light?
#3
Eater of Rice
Join Date: Mar 2002
Location: Lincoln, NE
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by delsol161
i'm putting in an aftermarket tach, since my stocker redlines @ like 6600 or so. i'm gonna put in an autometer Cobalt 10,000 rpm tach. where should i set the shift point for the shift light?
which b18, and i can't tell you where to shift, but i can tell you redlines if you tell me which b18 you have.
#8
Eater of Rice
Join Date: Mar 2002
Location: Lincoln, NE
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by delsol161
lot bad. for some reason i was under the impression that it revved closer to the same rpms as the GS-R (wich is what i wanted)
won't do you any good, unless you plan on replacing it with a gsr.
#10
been there done that
Originally Posted by delsol161
i was gonna get a gsr originally, but nobody seems to have a decent one for anything under $800