WTB: MISC EF parts and a complete D series for EF
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: Utah
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
WTB: MISC EF parts and a complete D series for EF
ok found my sister an 91 SI hatch, and I need quite a few things for it and I need them soon. I'll be firefighting for the next week but when I get back I'll be ready to buy some stuff.
Here are the things I can think of off the top of my head:
-D series complete swap for and EF. A good D16a6 would be best, but I wouldn't mind any d series complete swap as long as it fit correctly. Cheap is the goal here with good gas mileage.
-EF black carpet
-EF black or carbon fiber hood
EF black center console peice, the area that holds the AC buttons and I also need the AC buttons and all that stuff. Everythign in the middle of the dash
-EF front bumper
-EF front turn signals
-EF stock tail lights, outers only
-EF driver side pillar, the old owner cut gauge holes. Need one without holes.
Also, willing to trade full mandrel 3" exhaust for EF with magnaflow muffler, for a stock exhaust plus $50, or for a decent aftermarket NA ef exhaust setup. I don't need 3" for a 1.6l NA
There are definately more parts I need, but this is just a starting list. PM me if you have a ton of EF junk lying around. My sis needs your help.
Thanks guys
Here are the things I can think of off the top of my head:
-D series complete swap for and EF. A good D16a6 would be best, but I wouldn't mind any d series complete swap as long as it fit correctly. Cheap is the goal here with good gas mileage.
-EF black carpet
-EF black or carbon fiber hood
EF black center console peice, the area that holds the AC buttons and I also need the AC buttons and all that stuff. Everythign in the middle of the dash
-EF front bumper
-EF front turn signals
-EF stock tail lights, outers only
-EF driver side pillar, the old owner cut gauge holes. Need one without holes.
Also, willing to trade full mandrel 3" exhaust for EF with magnaflow muffler, for a stock exhaust plus $50, or for a decent aftermarket NA ef exhaust setup. I don't need 3" for a 1.6l NA
There are definately more parts I need, but this is just a starting list. PM me if you have a ton of EF junk lying around. My sis needs your help.
Thanks guys
#2