FS: b16/b18c5 JRSC and dyno tuned hondata@11.5 psi
#1
Member
Thread Starter
Join Date: Sep 2003
Location: South Cali
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
FS: b16/b18c5 JRSC and dyno tuned hondata@11.5 psi
My JRSC is finally up for sale. Has 7K since the rebuild from Mugnusum. The rebuild itself cost me $850. Rotors were fully rebuilt and reoiled. comes with stock 6 psi pulley and MVM stepper 9 psi pulley. The 9psi pulley was actually pulling at 11.5 psi when i was getting it dyno tuned at autowave in hungtington beach. will include everything necessary for the install (ex. belts, pulleys, bolts, screws, etc). $1400.
also have the hondata S200B, p28, PnH RC 550s, resistor box, teg iat sensor, 3 bap map, and conversion harness. the s2b has a conservative $750 dyno tune with the jrsc at 11.5 psi at autowave in hungtington beach, ca. would be a great compliment with the JRSC. pm with offers.
prices do not include shipping.
i also have a few other civic si stuff for sale along with vouches at clubsi.com
http://forums.clubsi.com/showflat.ph...t=1&PHPSESSID=
also have the hondata S200B, p28, PnH RC 550s, resistor box, teg iat sensor, 3 bap map, and conversion harness. the s2b has a conservative $750 dyno tune with the jrsc at 11.5 psi at autowave in hungtington beach, ca. would be a great compliment with the JRSC. pm with offers.
prices do not include shipping.
i also have a few other civic si stuff for sale along with vouches at clubsi.com
http://forums.clubsi.com/showflat.ph...t=1&PHPSESSID=
#3
Member
Thread Starter
Join Date: Sep 2003
Location: South Cali
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
#4
Member
Thread Starter
Join Date: Sep 2003
Location: South Cali
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts