Integra Modification Information!
06-09-2005, 01:48 PM
#1
Registered User
Thread Starter
Join Date: Jun 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Integra Modification Information!
Okay so I'm the new guy, just bought a 98 Int. GS-R. Looking for input on what kinds of aftermarket I can use as far as quality and more imphasis on torque rather than H.P. Wanting to keep it looking stock and not too loud but I could go either way. Anyone out there with some advise, greatly thanked. 
06-09-2005, 03:44 PM
#2
Working on project CRX Si
Join Date: Feb 2005
Location: In a van down by the river
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
search button :a: ...but basically IMO, apexi ws 2, comptech icebox, JDM ITR header ( if u dont care about being carb legal), if u do then get a dc sports 4-1 stainless steel header. this should be a good combo for an i/h/e setup. u should probably start up like this
06-17-2005, 11:58 AM
#7
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by crw9911
I Am Looking To Keep It Looking Stock But Have A Real Beast Inside Maybe Pushing Top 13's If Possible
06-17-2005, 11:59 AM
#8
Apathy Kills
Originally Posted by crw9911
I Am Looking To Keep It Looking Stock But Have A Real Beast Inside Maybe Pushing Top 13's If Possible
A well-tuned, appropriately sized turbo will work nicely on an internally stock GSR motor. And as your budget grows, you'll have the basic stock to build a 300+ hp motor.
Where are you located?
Is California smog legality a concern?
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!