Notices

Checking the motor mounts

Thread Tools
 
Old 06-02-2005, 07:31 PM
  #1  
mdaman
Member
Thread Starter
 
mdaman's Avatar
 
Join Date: Aug 2004
Posts: 70
Likes: 0
Received 0 Likes on 0 Posts
Default Checking the motor mounts

I was wondering how to check the motor mounts b/c i have an auto and the car seems to shake when shifting and i heard this was something that could be the cause.

Also i have heard mixed reviews about transmission coolers and was wondering if it is a hard or easy install and if it is worth the effects.



1996 LS 92k
Old 06-02-2005, 07:40 PM
  #2  
Provocateur
On permanent hiatus
 
Provocateur's Avatar
 
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes on 0 Posts
Default

There are 5 mounts total. There are two in the front down near the wheel wells on each side, one on the top of the tranny, one near the power steering pump, and then one between the tranny and firewall down low. The last one is the biggest pain in the ass. You can only check it if you get underneath the car and look up.

Just check for severe cracking and broken rubber. The two in the front are most likely to go first, but the tranny one either on the top or down low could be your problem.
Old 06-03-2005, 09:33 PM
  #3  
mdaman
Member
Thread Starter
 
mdaman's Avatar
 
Join Date: Aug 2004
Posts: 70
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the info shmoo and is it hard to replace these if they need it?
Old 06-03-2005, 10:45 PM
  #4  
Provocateur
On permanent hiatus
 
Provocateur's Avatar
 
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes on 0 Posts
Default

I have replaced the front two since they broke completely but I am unsure about the other two on the side. I know that the rear one that you need to get underneath the car to replace is a complete pain in the ass.
Old 06-03-2005, 11:37 PM
  #5  
shabacash
I'M SO JDM, I HAVE SARS
 
shabacash's Avatar
 
Join Date: Apr 2005
Location: badalandbad
Posts: 4,537
Likes: 0
Received 0 Likes on 0 Posts
Default

why do mounts break??

edit - might be a stupid Q, but that sounds sorta scary
Old 06-04-2005, 10:47 AM
  #6  
Provocateur
On permanent hiatus
 
Provocateur's Avatar
 
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by shabacash
why do mounts break??

edit - might be a stupid Q, but that sounds sorta scary
They are made of rubber and the motions of the engine and weather takes a toll on them.
Old 06-18-2005, 09:03 PM
  #7  
mdaman
Member
Thread Starter
 
mdaman's Avatar
 
Join Date: Aug 2004
Posts: 70
Likes: 0
Received 0 Likes on 0 Posts
Default

well since i have 3 garages and they are all full and i have no where to work on my car, how much would a dealer charge for a full replacment?
Old 06-19-2005, 11:16 AM
  #8  
honura
Seni
 
honura's Avatar
 
Join Date: Aug 2003
Location: N.Y. Queens
Posts: 3,401
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mdaman
well since i have 3 garages and they are all full and i have no where to work on my car, how much would a dealer charge for a full replacment?


Tooooooooooooo much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Old 06-19-2005, 12:02 PM
  #9  
Brar
|:]
 
Brar's Avatar
 
Join Date: Aug 2004
Posts: 14,182
Likes: 0
Received 0 Likes on 0 Posts
Default

where and how many mounts are on a 90 g2? same 5 mounts or less? same location?




All times are GMT -8. The time now is 04:52 PM.