Getting my ECU programmed
04-29-2005, 09:50 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Getting my ECU programmed
got a few questions....
What are the sizes of the stock injectors?
he needs to know my max boost setting (i guess i'll never run more than 10psi) Does it work fine for anything under that? Or should I tell him a lower psi?
He is going to set a shiftlight (CEL hack thingie i think) What rpm should i set?
Is it safe to adjust the rpm for vtec? What is default?
What are the sizes of the stock injectors?
he needs to know my max boost setting (i guess i'll never run more than 10psi) Does it work fine for anything under that? Or should I tell him a lower psi?
He is going to set a shiftlight (CEL hack thingie i think) What rpm should i set?
Is it safe to adjust the rpm for vtec? What is default?
04-29-2005, 11:51 AM
#3
Senior Member
Thread Starter
Join Date: Apr 2003
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by :snoopy:
if i were you i'd get something programmable so you can change settings whenever you want
This chip can be reprogrammed, but i dont have the prom burner. This guy will do it for free so i dont need a eprom flasher. I just want to get this thing up and running with the turbo, I dont plan to keep tuning to squeeze every HP out of it I can.
But I really want to know what is the factory injector size? ?cc
04-29-2005, 11:23 PM
#6
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kabooki
i have no idea what this guy is gonna use...
Sounds to me like an ebay special preburned chip. Is he at least going to tune it on a dyno before burning the chip or just make you one from 2,000 miles away without ever meeting you or seeing your car/setup?
