westcoaststyle

Need some advice on slicks, guys. What do you recommend and where can they be purchased? Looking for something that will fit a 15x6.5" rim.

Thanks!

BoostedITR41

I would get a 15x7 wheels cause 6.5 is too small for your power. also run 24.5x8x15 slicks

b16ahybrid

24" m&h or m/t should do you good.

30psiciv

The m&h are a much softer compound than the mt. The size you need is much more a function of your tranny vs roll out vs hp. Do you plan on using 5th, probably not.

If you want to know what I think about each manufacturer lmk because I have used them all.

TeHJuSTiN

Judging by his trap speed he's probably rolling across the line at ~121mph. I'm not sure what tranny he has but if he has the GSR, he's probbaly red lining 4th.

BoostedITR41

24.5" slicks should allow him to stay well into 4th

westcoaststyle

Depends on how badly I spin. I have to shift into fifth now and then. I might have the rev limit upped a bit so I can use more of the lower gears and hopefully not bounce on the fuel cut in 4th.

30psiciv, what axles are you using?