97 ITR World Challenge FS CANADA
03-04-2005, 08:00 AM
#1
Registered User
Thread Starter
Join Date: Mar 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
97 ITR World Challenge FS
97 ITR World Challenge car For Sale
8 Point Ron O'brein Cage
OMP Seat.Momo Removable wheel
Fire System
Penske Shocks 3 way front,2 way rear
eibach Springs
Skunk front upper arms
Ground Control rear sway bar
Custom adjustable links withspherical end for tie rod rear camber and toe
Mix of stock urethane and delrin bushings
AP 4 piston Calipers with 2 piece floating roters front
Stock brakes on rear
PFC ,Hawk pads selection
Jackson Racing Fuel Pump
RC Injectors
Extrudehoned intake NSX Airbox Carbon Fiber Intake tube
Mugen Header and custmm SS Exhaust
Fuel Safe 1.5" Dry break
Fluidine Rad,oilcooler cw remote filter
12 15x7 wheels (trs)
4 16x7.5 wheels (rays)
Tranny w 4.9FD ATS LSD
ATS Carbon Clutch with lightweight flywheel
Two Motors to choose
#1 2.0l World challenge Spec 240+ WHP
#2 1.8l all honda internals skunk cams adj cam gears 12.8-1 comp
balanced ported and polished head valve job 215WHP
Car is available as roller $18000.00usd
Complete with engine #2 $23000.00usd
Complete with engine #1 TBD
Lots of spares new and used also available
Delivery to upstate New York car sits in Toronto
Call Mike at 416 778 1353 or 416 543 4201
8 Point Ron O'brein Cage
OMP Seat.Momo Removable wheel
Fire System
Penske Shocks 3 way front,2 way rear
eibach Springs
Skunk front upper arms
Ground Control rear sway bar
Custom adjustable links withspherical end for tie rod rear camber and toe
Mix of stock urethane and delrin bushings
AP 4 piston Calipers with 2 piece floating roters front
Stock brakes on rear
PFC ,Hawk pads selection
Jackson Racing Fuel Pump
RC Injectors
Extrudehoned intake NSX Airbox Carbon Fiber Intake tube
Mugen Header and custmm SS Exhaust
Fuel Safe 1.5" Dry break
Fluidine Rad,oilcooler cw remote filter
12 15x7 wheels (trs)
4 16x7.5 wheels (rays)
Tranny w 4.9FD ATS LSD
ATS Carbon Clutch with lightweight flywheel
Two Motors to choose
#1 2.0l World challenge Spec 240+ WHP
#2 1.8l all honda internals skunk cams adj cam gears 12.8-1 comp
balanced ported and polished head valve job 215WHP
Car is available as roller $18000.00usd
Complete with engine #2 $23000.00usd
Complete with engine #1 TBD
Lots of spares new and used also available
Delivery to upstate New York car sits in Toronto
Call Mike at 416 778 1353 or 416 543 4201
05-09-2005, 08:04 PM
#3
Registered User
Join Date: Jul 2004
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
