fac90

My power door locks haven't worked for a few months because I can't figure out the exact problem. Basically, when you click the drivers side door lock switch, a sound is heard, but the door locks do not actuate. Also, the factory keyless entry stopped working before the door locks. The only possible problem is the power door lock control unit ($150). Anyone else have a similiar problem.

honda guy

does it click or sound like a grinding noise?

fac90

It does click, both ways pressing up and down. I checked the fuse and its ok.

hondatech

I would check outputs from the control unit. You could see if your getting reverse polarity from each connector going into the actuator....

hondaaccordf22a

Hold open the door handel and push lock