TSX K24 V6 engine VAFC2 installation problem!
01-06-2005, 09:02 AM
#1
Registered User
Thread Starter
Join Date: Jan 2005
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
TSX K24 engine VAFC2 installation problem!
Hi Guys
I tried to install VAFC2 to my car, K24 engine TSX (sells as Honda Accord here) tiptronic, but there is a big problem. The car does not work properly, the tiptronic system is off, traction control is on everytime, error light occured on the dashboard.
The throttle is drive by wire and we are suspicious about it. By the way we don't have the wiring diagram for K24 engine. My mechanic is experienced on installing VAFC2 to B16A engine but this is the first time for him installing at TSX, so we are stucked!
Has anybody here installed VAFC2 to his TSX K24? Can you give me some feedback or support, for example wiring diagram etc.?
I will be really grateful!
Thanks.
I tried to install VAFC2 to my car, K24 engine TSX (sells as Honda Accord here) tiptronic, but there is a big problem. The car does not work properly, the tiptronic system is off, traction control is on everytime, error light occured on the dashboard.
The throttle is drive by wire and we are suspicious about it. By the way we don't have the wiring diagram for K24 engine. My mechanic is experienced on installing VAFC2 to B16A engine but this is the first time for him installing at TSX, so we are stucked!
Has anybody here installed VAFC2 to his TSX K24? Can you give me some feedback or support, for example wiring diagram etc.?
I will be really grateful!
Thanks.
01-06-2005, 01:53 PM
#4
Senior Member
Join Date: Nov 2003
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BombX
excuse me, you are right! 
that could be the problem if the AFC is set up for a v-6....there should be a section where you pick the sensor type and engine config.