B18C swap
12-31-2004, 03:16 AM
#1
Nissan 240
Thread Starter
B18C swap
Hey guys, I have a 96 B18C on the way, and it's going into a 97 Civic EX, (canadian version - no Vtec). can I use the complete GSR harness since it's OBD2, and so is my system? or do I still need to cut it up and reuse my harness... thanks guys.
Mark
Mark
12-31-2004, 04:51 AM
#2
WHAT OK YEAH!
Join Date: Sep 2003
Location: overthere
Posts: 5,565
Likes: 0
Received 0 Likes
on
0 Posts
The GSR harness is a 2 piece harness and your car is a 1 piece harness so you CANT use the GSR harness your going to have to use yours and run the vtec wires this
web-site helped me out alot
http://www.ff-squad.com/tech/wiring/wiring.96-98.jpg
web-site helped me out alot
http://www.ff-squad.com/tech/wiring/wiring.96-98.jpg
12-31-2004, 05:33 AM
#3
Nissan 240
Thread Starter
thatnks, I appreciate it. I thought there was a jumper harness I could use so that I could use the factory GSR harness, and hook that into my ECU; is this correct? if not, thatnks for the link.
Mark
Mark