Notices
Drag Strip From the staging lanes to the finish line, this is the spot for on-track drag racing discussion.

First night racing!

Thread Tools
 
Old 11-12-2004, 04:55 PM
  #1  
FooD2000
Still Water
Thread Starter
 
FooD2000's Avatar
 
Join Date: Aug 2004
Location: San Diego
Posts: 1,236
Likes: 0
Received 0 Likes on 0 Posts
Default First night racing!

y0, today is my first night at the strip. i just bought a helmet, it's a 1/8 track so it's pretty small but good for me.

i'm running an 99 ls b18b w/ basic bolts I/H/E. i'm curious to see my times before going turbo. wish meh luck!
i'll post my times later tonight
Old 11-12-2004, 05:04 PM
  #2  
ikarus
 
ikarus's Avatar
 
Join Date: Nov 2003
Location: nyc area
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
Default

wut did u run?
Old 11-12-2004, 11:04 PM
  #3  
FooD2000
Still Water
Thread Starter
 
FooD2000's Avatar
 
Join Date: Aug 2004
Location: San Diego
Posts: 1,236
Likes: 0
Received 0 Likes on 0 Posts
Default

it was fun, lemme give you my times.

10.976
10.776
10.654
12.589 "really bad launch so i costed"
10.893
14.358
10.552
the track was pretty awful, i was still peeling out somtimes in 2nd gear. my friends turboed celica was running 9.7. over all fun
Old 11-13-2004, 09:09 AM
  #4  
westcoaststyle
Still here... sorta...
 
westcoaststyle's Avatar
 
Join Date: Sep 2000
Location: CO
Posts: 17,177
Likes: 0
Received 2 Likes on 2 Posts
Default

Congrats man. Not sure how that all translates to 1/4 times. Not much of an 1/8 guy, myself.
Old 11-13-2004, 08:31 PM
  #5  
TeHJuSTiN
NAM #0001
 
TeHJuSTiN's Avatar
 
Join Date: Jun 2002
Location: Cornelius, NC
Posts: 4,050
Likes: 0
Received 0 Likes on 0 Posts
Default

Those times translate to a mid 16. Not too bad for a bolton LS, should be a little quicker though.
Old 11-14-2004, 08:37 PM
  #6  
FooD2000
Still Water
Thread Starter
 
FooD2000's Avatar
 
Join Date: Aug 2004
Location: San Diego
Posts: 1,236
Likes: 0
Received 0 Likes on 0 Posts
Default

mid 16? not bad

the part which i had most trouble on was the launch, the best to rev at for my car is 2500 i figured out, (practicing in parking lots). but when i get up at the light... i have like 3 seconds to get my rev right and also looking at the light... i found myself reving at like 4,-5000 rpm so i spun crazy.

eventually i just didn't launch and i still spun, i spun when i shifted at 6,500 rpm to 2nd gear! the track was pretty bad, but.. non-the less my reaction sucked.
Old 11-16-2004, 11:54 AM
  #7  
Derek
you motorboatin' s.o.b.
 
Derek's Avatar
 
Join Date: Mar 2002
Location: Mexico, by Jaymar
Posts: 29,656
Likes: 0
Received 0 Likes on 0 Posts
Default

was this at qualcomm?
Old 11-16-2004, 08:01 PM
  #8  
FooD2000
Still Water
Thread Starter
 
FooD2000's Avatar
 
Join Date: Aug 2004
Location: San Diego
Posts: 1,236
Likes: 0
Received 0 Likes on 0 Posts
Default

yes it was.
Old 11-16-2004, 09:49 PM
  #9  
TeHJuSTiN
NAM #0001
 
TeHJuSTiN's Avatar
 
Join Date: Jun 2002
Location: Cornelius, NC
Posts: 4,050
Likes: 0
Received 0 Likes on 0 Posts
Default

My n/t dsm and your LS is very similar. The powerband is about the same and the gearing is almost identical. I rev to about 3500-4000 and just slip the clutch. I usually get a little bark from the tires or very little wheel spin and it has given me low 2.2 60's and one time a 2.18.
Old 11-17-2004, 09:27 AM
  #10  
Kai
Rotorphile.
 
Kai's Avatar
 
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes on 0 Posts
Default

So you're averaging high 10's... I would have expected around 10 flat from that setup.

My stock engine does 10 flat (15.5 quarter) without much effort. :dunno:



All times are GMT -8. The time now is 04:54 AM.