fender rubbing? 17" rims and 1.5 drop
#1
fender rubbing? 17" rims and 1.5 drop
hi,
I have H&R Spring with 1.75 Front and 1.5 back drop on my integra. I just bought 17" rims with 205/40/17 tires.
Can I put my rims in without any rubbing? I put the tire 17" tire side by side with the car, I do see that it touches the fender.
Any solution/suggestions?
I am thinking of doing a fender roll, is it gonna work?
thanks so much.
I have H&R Spring with 1.75 Front and 1.5 back drop on my integra. I just bought 17" rims with 205/40/17 tires.
Can I put my rims in without any rubbing? I put the tire 17" tire side by side with the car, I do see that it touches the fender.
Any solution/suggestions?
I am thinking of doing a fender roll, is it gonna work?
thanks so much.
#2
Are you sure it's touching the fender? Is it when you turn or when you hit a bump?
What shocks do you have?
What shocks do you have?
__________________
99 Integra GSR
06 TSX
duck squad member #00003
99 Integra GSR
06 TSX
duck squad member #00003
#3
I am not sure because i didn't put it in yet. I have KYB AGX shocks.
When I put the tire by my car, I do see that i touches.
Is it gonna be ok? I don't want to waste money on labor and having it return later.
thx
When I put the tire by my car, I do see that i touches.
Is it gonna be ok? I don't want to waste money on labor and having it return later.
thx
#4
Originally Posted by Integra_95
I am not sure because i didn't put it in yet. I have KYB AGX shocks.
When I put the tire by my car, I do see that i touches.
Is it gonna be ok? I don't want to waste money on labor and having it return later.
thx
When I put the tire by my car, I do see that i touches.
Is it gonna be ok? I don't want to waste money on labor and having it return later.
thx
I had Comptech Drop Springs (1.25/1.5), and 17x7.5 205/40/17, I never had a problem with rubbing on the fenders. I would rub on the firewall when I'd turn my wheels all the way, but it was nothing major.
__________________
99 Integra GSR
06 TSX
duck squad member #00003
99 Integra GSR
06 TSX
duck squad member #00003
#7
www.ufc.com
Join Date: Sep 2004
Location: Irvine CA
Posts: 2,920
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MaxBoosT
If you are using the correct offset 17" wheels, you should not have issues. I only rub when I have a few people in the car. I have the same exact setup as you. (H&R & KYB)
#9
HAN Authorized Vendor
Put the tire on, drive around, and see if it rubs.
Most wheels for the 94-01 Integra have an offset of 38mm or 40mm, though I have seen 36mm, 37mm, and 42mm as well. My 16" OZs have a 37mm offset and I have no problem with rubbing; I have AGX shocks and Comptech springs.
Most wheels for the 94-01 Integra have an offset of 38mm or 40mm, though I have seen 36mm, 37mm, and 42mm as well. My 16" OZs have a 37mm offset and I have no problem with rubbing; I have AGX shocks and Comptech springs.
#10
they will not rub dont worry about it. you cannot tell by putting the wheels and tires up to your car, they will be totally different on your car than if you just set them by your car.