Post engine bay pics here, 5th gen only please
#1
cause it's tight!
Thread Starter
Join Date: Jun 2002
Location: 916
Posts: 8,044
Likes: 0
Received 0 Likes
on
0 Posts
Post engine bay pics here, 5th gen only please
I need to find out where the windshield washer hose that comes off the inside of the hood connects to. I replaced my hood and that hose came off w/the hood but I didn't see where it went and can't find it. Please help me figure this out if you can, thanks.
#5
#6
cause it's tight!
Thread Starter
Join Date: Jun 2002
Location: 916
Posts: 8,044
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by /^Blackmagik^\
here's a pic
http://www.geocities.com/ravenstorm_/picture005.jpg
just copy and paste the link
here's a pic
http://www.geocities.com/ravenstorm_/picture005.jpg
just copy and paste the link
#7
Originally posted by 94uhkord
Cool, thanks bro. It looks like im gonna have to undo the bolts on the top of the fender inside the engine compartment to connect that hose again. Do you think that hose being unplugged can be the cause of my wipers cycling 3 times(as they would if you pressed the lever to just wash the windows) then stopping, then doing it again a few minutes later? I sure hope so. I can't imagine anything up front affecting my wipers.
Cool, thanks bro. It looks like im gonna have to undo the bolts on the top of the fender inside the engine compartment to connect that hose again. Do you think that hose being unplugged can be the cause of my wipers cycling 3 times(as they would if you pressed the lever to just wash the windows) then stopping, then doing it again a few minutes later? I sure hope so. I can't imagine anything up front affecting my wipers.
#8
cause it's tight!
Thread Starter
Join Date: Jun 2002
Location: 916
Posts: 8,044
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by /^Blackmagik^\
i dunno dude. that sounds more like a wiring thing to me. then again my washers haven't worked since i've had the car. not like i'd use them anyway
i dunno dude. that sounds more like a wiring thing to me. then again my washers haven't worked since i've had the car. not like i'd use them anyway
#9
Originally posted by 94uhkord
can you think of any wiring that would cause the wipers to malfunction that could be damaged when replacing the hood and fender and radiator support? These are the repairs that were done the day my wipers started acting crazy.
can you think of any wiring that would cause the wipers to malfunction that could be damaged when replacing the hood and fender and radiator support? These are the repairs that were done the day my wipers started acting crazy.
#10
cause it's tight!
Thread Starter
Join Date: Jun 2002
Location: 916
Posts: 8,044
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by /^Blackmagik^\
dunno.. may just be a coincidence that they started doin funky sh1t the same time you replaced those things. break out the helms manual and go to work is the best advice i can tell ya.
dunno.. may just be a coincidence that they started doin funky sh1t the same time you replaced those things. break out the helms manual and go to work is the best advice i can tell ya.
Thread
Thread Starter
Forum
Replies
Last Post
Inacurals
Integra & 97-01 Integra Type-R
0
10-04-2004 01:50 PM
ElectronBlueGSR
92+ Civic/EL & Del Sol
14
09-30-2002 02:10 AM