96 Tl Rotor removal - Honda-Acura.net

dazwyatt · 09-15-04, 08:24 PM

I have a 96 Tl that needs rotors, I cannot get the hub assy. to come loose from the bearings. I have tried slide hammers with no luck. any suggestions?

Registered and logged-in users don't see this ad!
Register your free account today.

AcuraFanatic · 09-18-04, 08:36 PM

Try heating up the bearing?

**AcuraTL** · 09-18-04, 08:58 PM

You usually need to get a machine press to press it out. You can take the whole hub assembly to a mechanic or a machine shop and have them press it out for you.

09-18-04, 08:36 PM	#2
AcuraFanatic Senior Member Join Date: Mar 2000 Location: Nashua, NH Posts: 37,274	Try heating up the bearing? __________________ EM2

09-18-04, 08:58 PM	#3
AcuraTL Lord Vader Moderator Join Date: May 1999 Location: Bay Area, CA Posts: 1,460	You usually need to get a machine press to press it out. You can take the whole hub assembly to a mechanic or a machine shop and have them press it out for you. __________________ Honda-Acura.net Vigor/TL/CL Forum Moderator. Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode