Midnite93

I want a H22A motor, but I need to know what I need. My civic is a 93 DX coupe. Does anyone know what parts I need besides motor, any cutting or welding, can i keep my a/c, and are there any publications or referance materials.

powerflow

make sure you buy a motor from a reputable company, If you buy a usdm do not buy a SH model h22a4. You will have to trim the tranny bracket with most mount kits. You will also need the whole cable shifter w/cable. There is good info on honda forums for the wiring&ect if you search

Midnite93

With the shifter and cables will I need to make any holes in the floor board.
With that shifter is there a way to get a short throw shifter

powerflow

have you searched around other forums/threads, the info is here you just have to search to find it. yes you have to cut and fab a way to fasten the shifter assembly.

RicoD

search for it.

:P

top of my head, mounts, integra axles, errr...shift linkage from a....damn it i cant remember just search

Cyberdx16

chech out honda-tech.com and look under the hybrid forum and there is a sticky on eg h22 swap