Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

i keep blowing injector o rings?

Thread Tools
 
Old 08-04-2004, 08:33 PM
  #1  
1hot4door
Registered User
Thread Starter
 
1hot4door's Avatar
 
Join Date: Jul 2004
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default i keep blowing injector o rings?

so last month i replaced the o ring on the last injector (closest to battery) , i start it today and the injector directly to the right of it has the same leak , is this most likely the fuel rail? or could the fuel psi be goofy? please help im desperate , btw the rail is stock , there is a aftermarket fpr , what should the stock psi be?
Old 08-05-2004, 06:18 PM
  #2  
boostlee
Registered User
 
boostlee's Avatar
 
Join Date: Jul 2003
Location: Miami, Florida
Posts: 196
Likes: 0
Received 0 Likes on 0 Posts
Default

sometimes it hard to get all the injectors in at the same time, sounds like your pinching the other o ring this time.... happened to me to, try to lube the o rings first and push them on.... good luck
Old 08-09-2004, 05:41 PM
  #3  
SOHKeg
Registered User
 
SOHKeg's Avatar
 
Join Date: Sep 2003
Location: NOVA
Posts: 164
Likes: 0
Received 0 Likes on 0 Posts
Default

not sure, i think my gsr is at like 42psi. but i think i read somewhere that civics run at like 35psi. not sure though.




All times are GMT -8. The time now is 03:13 AM.