Picture thread. Post your pics! <but read guidelines>

[TonyBodega]

Finally got a chance to take some picz . . no wash . . just before it was bout to rain . . . Um . . . motor is stock 1.6 sohc vtec // Skunk2 Full Coilovers (which are ass) // SI Wheelz // JDM Ferio Front Spoiler // JDM Ferio Corners // JDM Ferio Window Visors GSR axel back . . . I need to adjust the tip let me kno.

Registered and logged-in users don't see this ad! Register your free account today.

[SI Hatch]

ENGINE: JDM H22A SWAP
INTAKE
2.25" FULL EXHAUST

interior: stock

exterior: stock

[turbogeo]

I apologize for the resolution on some of the photos. These are VERY old pictures. Currently I have stock bumpers on and in need of a paint job.





Engine:
D16Z6
AirReseach T3
2.5 IC piping
Asani FMIC
TurboXS RFL BOV
Golden Eagle Vacuum manifold
SSAutoChrome Exhaust manifold
2.5" DP-back exhaust w/ flex pipe (no cat)

Suspension & Shoes:
KYB AGX struts
Eibach Sportline springs
17" Exel TZ-10 gunmetal
205/40/17 Kumho Ecsta AST

Electionics:
AutoMeter A/F & Boost gauge
Greddy Profec-B Spec 2 & Turbo Timer
JVC Kameleon

Misc:
VW Beetle "Turbo" emblem <3

[nugget57]

1

[nugget57]

Hi Guys,
This is my ride, no mods as yet but have a 4-2-1 header, CAI and coilovers sitting in my garage ready to go on when I can find the time. I have put 15" rims and tint since I bought her.
Before:


After:

[CivicSweetie]

[rays>eg]

Here ya go

[Trance]

Multiple Trophy winner including Rignbeck 2007, B18B1 motor swap, 5 speed, New custom inteirior,custom paint (Black red pearl),Never raced, Original owner, Mods include, Lambo doors, drag wheels, NOS, venom cam gears, ported head, Full body kit, Urathane enngine and trans mounts, DC sports full exhaust, OBX Racing header, Russel stainless steel hoses, Custom firewall, Stainless steel brake lines (not hoses). Black suade headliner and a pillars, and much much more.

[jdmeg6hatchy]

92 Civic DX









MODS:

jdm amber corners
jdm eg6 fog lights
jdm novice driver badges
jdm antenna block plate *hop*
jdm eg6 amber dash clock
jdm eg6 amber gauge cluster
jdm eg6 honda road flare
jdm eg6 honda side markers
jdm rear c pillar bar
spoon style mirrors
spoon reservoir tank covers
spoon style front lip to come...
spoon style wing with l.e.d.
integra drivers seat

dropzone coilovers
honda civic hx wheels/tires
short ram intake
b&m short throw shifter
gsr upper map light
gsr shift knob
hamp oil filter
ngk iridium plugs
ngk plug wires
OEM muffler
toms ms 4-1 header

jdm b18b
2000 civic si trans.
xtd stage II clutch
samco coolant hoses
hasport street mounts
hasport shift linkage
b20 valve cover

kenwood flip down cd/mp3/sirius/xm
infinity speakers

[Zabouskie]

Hi all, here is my ride. 2000 Civic 4 Door DX Manual

This photo is of it few years ago


And here is my car now, this present day.







replacing the head gasket after it blew and cylinder #3 was drinking water.


My baby and I




Angel eye head lights


The Inside








The mods, work, and info


Leather seat interior retrofitted
painted door panels to black
Used Carpet spray paint and painted floors to black
replaced front grill
Wired in Alarm system with two way pager
Installed automatic lock actuators (DX's have manual locks)
Installed BMW window motor switches wired up to control the door lock actuators
Electronic 4 digit Tachometer W/Shift light (despite the fact I absolutly do not need it)
short shifter
angel eye head lights
euro tail lights
dual tip muffler
14" alloy rims (yes I know its laughable, its the one bad thing, it was because I didn't want to give up my warranty tires, but still better than stock rims)
Brembro brake rotors
painted valve cover to red
added the fog lights
Integra GSR cluster conversion
rear window mount radio antenna, to listen to anything over the radio
CD player, MP3 player and aux input
Sirius satelite radio
KYB AGX adjustable shocks with ground control coilovers
Scangauge OBD2 computer display

mileage: 143,xxx at this time
DOB: March 2000
orignal interior color: Gray
exterior paint color: white
Engine: Stock D16Y7

work
replaced timing belt and water pump at 95k
replaced all other belts at 120k
Replaced lead oxygen sensor twice, first at 110k, and again at 130k, both tossed the P0133 (slow o2s responce code)
replaced AC compressor at 134k
replaced alternator twice: 110k and 121k
Head Gasket failure and replacement at 129k
Clutch replaced at 135k
Windshield at 123k
replaced right CV axle and lower right ball joint at 136k
Just this past week: took apart shift linkage to replace all the small shift linkage bushings, shifter had too much loose play in it.
And the list goes on I cannot remember everything.

Its been ages now since I last added a new thing to the car, but I do love it to death, it is still with the stock engine, so its not very fast at all, but has a decent ammount of pick up. I take good care of her, and inspect everything I can on a routine basis to make sure all is good. If I am ever going to do a major mod, it'll be a D16y8 head conversoin.

[gsr wannabe]

92 Civic hatchback


















turbo GSR built oilpan to valvecover by Attitude racing

[lestah]

1999 Civic SiR
Rims are no longer ITR's. its TE37's in gunmetal
Mods:




Exterior:
Mugen Front lip (Replica)
CF spoon replica mirrors
HRC Racing Carbon Fiber Hood
PPG Antracite Grey paint
OEM Yellow Fog light
Mugen Rear valence (Replica)
OEM red/white tail lights
CTR Headlights
Bixenon HID System ( 4 ballasts)
Shaved Rear emblem and Relocated front plates
RS Front Emblem
Ferio Trunk Emblem






Engine:
J's Racing Intake Tube
CTR Camshafts
AEM Tru-Time Camgears
Apexi VAFC I
Mugen 4-2-1 Stainless Header
CTR midpipe
Mugen Twinloop Exhaust
Spoon Lightened Flywheel
Exedy Full faced organic clutch disk and pressure plate
Custom fabricate Hood Damper



Suspension and Wheels
Spoon Shocks
Tanabe DF springs
Mugen Front upper strutbar
ITR rear upper strutbar
Neuspeed Rear lower Tie bar
CTR 5 lug conversioin
Volk Racing TE37 Gunmetal
205/45/16 Advan Neovas AD07
WORK lugnuts








Interior:
Nardi Torino Steering wheel
CTR Gauges
CTR shiftknob
CTR shift boot
Pivot Shift Lamp
ITR Recaro seats (black)
ITR 4 Door rear Seats
Mugen Pedals

[Nabeel]

Hi, This post of mine is very beneficial and informative, however there are some specific facts or information that I require. If anyone can help me in this matter then please send me a private message. Best Regards,

[JordanT]

Here is a photoshop drop of my car that my buddy did. Ground Control Coilovers are on their way here... Should look something like this possibly next week!

[Labrador]

2000 Honda Civic EX Coupe 5spd

I've had her for about six years now. I became interested in turbo back in mid 2006 and immediately fell in love with the Edelbrock PerformerX® kit, which I bought and installed myself in January, 2007. I absolutely love it!

Edelbrock PerformerX® kit, 6 PSI (I'm running Amsoil 10W-30 oil, Mobil 1 oil filter, and Champion RC9MC4 spark plugs)
Apexi WorldSport2 exhaust, stock cat
Autometer gauges and dual gauge bezel
OEM Civic Si parts:
- Front lip and side skirts
- Steering wheel and shift knob
- 13 mm rear sway bar
- Front shock tower brace
- 15" wheels with OEM size tires
Sylvania Silverstar headlight bulbs
Amber daytime running light system (www.daytime-running-lights.com)

DSCN0095½.JPGDSCN0097½.JPGDSCN02510096½.JPGDSCN02500095½.JPGDSCN02580100½.JPG

[sqsi]

Here is my 92 Si

[snoopiie]

my si is ma baby haha heres some..

got them wit ma `18 rims and then the famous stock si rims haha.
i kept the undercover look for now.

ill post better pics wen im done with the car and ill post what i have in it..

[solkid]

heres a few from my Honda Tuning shoot.





a few others

[BtTurboM3]

[ej2-b16a]

Damn thats nice =O

[d16drag-on]

'00 1.6EL

Under The Hood:
D16Y8; XSPower T3/T4 .50a/r @ 10psi; Denso 450cc Fuel
Injectors; Walbro 255lph Fuel Pump, B&M Fuel Pressure Regulator;
G-Sport Fuel Rail; Mishimoto Intercooler; GReddy Blow-Off Valve;
Cast Turbo Manifold; XSPower Wastegate; Ovrbst 2.5" Downpipe;
NGK #9 Spark Plugs; NGK Wires; APEXi N1 Exhaust

Brains:
P28 ECU w/ OBD2b-OBD1 Harness;
Crome, Crome Pro, Uberdata, TurboEdit

Stiff Stuff:
OmniPower Tylite Full Coilover Nitrogen Damper; 12/10kg Spring Rate
Front, Rear, Upper, and Lower Braces

Rollers:
17" DragDR8 10H; 205/40/ZR17 N3K
16" ICW Osaka 535GM; 205/40/ZR16 Toyo Proxes FZ4

Stoppers:
Slotted & Drilled Brembo Blanks;
Ceramic Brake Pads;

Outside:
Mugen Front Lip; ChargeSpeed Rear Lip; JDM Visors;
EG6 Side Markers; Smoked Bumper Lights; Smoked Taillights;
Blackout Headlight Conversion; Domani Badges; R-Spec Grill

Inside:
Mugen Replica Race Seats w/ 4-Point Harness; CTR Floor Mats;
R1 Pedals; Boost Gauge; Custom Luminescent Cluster;







to be continued...

[adva7328]

My 99 Civic fresh back from paint I could list all the things on and in the car but it would take a min so i will just post some pics

[JDMek4]

1996 civic DX
JDM b16a
-Dc 4-2-1 headers
-ctr cams
-ferra valves/retainers
-stock block
-JS1 tranny
-quaife LSD
-msd blaster coil
-msd 8.5 wires
-NGK iridium plugs
-cheap intake
-255 walbro fuel pump

interior/exterior
- SI cluster
- type R shift booth
- ex arm rest
- 16" rota Gt3 on bfg's
- yellow koni adjustable's w/ ground control coilovers
- 99-00 taillights
- 96-98 blk housing headlights
- 8k hids
- mugen lip
- typeR rear lip

[Chiovnidca]

Check link in sig for mods.

[EK_Girl]

My current daily driver:




65K HID's
DC Sport short shifter
Koni Yellow's on H&R Sports
SiR rims

[A-series]

Try to keep the drooling to a minimum.

[Black99EM1]

hope the pics worked.. this is my black pearl 99 civic si
b16a2 with stock internals
dc 4-2-1 header and full exhaust
aem v2 cold air intake
msd ignition with external coil
aluminum radiator
17" adr spades
clear tail lights
projector angel eye headlights
indiglo guages
exedy stage 2 clutch
7.5 lb fidanza flywheel
limo tint on all windows.. only brow on windshield
stock head unit for now, but sony 6.5 in doors and 6x9 in back

bought this baby bone stock from the original owner with 73k miles on it.. only thing it really needs is some paint work cuz it looks to have spent some time in the sun. i gotta wax it a lot haha. i love this car and keep it really clean.

coming soon:
skunk2 intake manifold and throttle body
cam gears
putting my two audiobahn 10s in once i build a box and i have 1000 watt sony xplod amp, just need a head unit.. mp3 with bluetooth probably sony xplod
looking into possibly boosting, nothing crazy.. maybe 7-9 lbs but i may wait and build the motor up first cuz i tend to drive the crap out of it and dont want to blow anything up.

[rodster84]

\[/img]

[pslsnakes]

Seeing some very nice cars in here. Makes me not want to post my daily beater.






Only mods are Megan header and test pipe, and a short ram intake. Original plans were to either do a full B series swap, or build and boost the D16Y8, but plans change.

Going to be selling this to a friend for $3700 and buying a 1997 S10 pickup extended cab. Slamming it on 20's and air bags and four 15" Fi BL's with about 6000w rms.

[jime64871]

Pretty cool builds and ideas in here. Last page is good. i like that 'sol!
Anyways here's a few pics of mine, nothing reallly unique like many in here: