Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Nasty Shake

Thread Tools
 
Old 06-06-2004, 07:01 PM
  #1  
AcuraFanatic
Senior Member
Thread Starter
 
AcuraFanatic's Avatar
 
Join Date: Mar 2000
Location: Southern NH
Posts: 37,274
Likes: 0
Received 0 Likes on 0 Posts
Default Nasty Shake

Ever since I got the rims mounted on my Vigor, around 70mph-80mph it will shake like a bastard sometimes. It comes and goes, but is there more often than not. Sometimes it will go away at higher speeds, other times it will get worse.

I performed a 4-wheel alignment and had the wheels rebalanced and it still happens.

I've heard two suggestions: Wheel spacers and center rings.

Can someone enlighten me as to what the problem might be and how to fix it?
Old 06-08-2004, 07:41 PM
  #2  
AcuraFanatic
Senior Member
Thread Starter
 
AcuraFanatic's Avatar
 
Join Date: Mar 2000
Location: Southern NH
Posts: 37,274
Likes: 0
Received 0 Likes on 0 Posts
Default

Nobody knows? :down:
Old 06-09-2004, 07:12 AM
  #3  
JimBlake
Senior Member
 
JimBlake's Avatar
 
Join Date: Jan 2003
Posts: 1,994
Likes: 0
Received 2 Likes on 1 Post
Default

Sometimes they won't notice a bent rim unless they're looking for it??

Wheel spacers just change your track. I don't think they'll do any good for your vibration. Centering rings just help hold the wheel centered. The center hole is supposed to fit close around the raised part in the middle of the hub. When the lug nuts are tightened properly, I don't think that's your problem either.

Find a place with a Hunter GSP9700 (URL below), that can measure road-force variations while it's balancing your tires. Maybe the tire itself isn't quite right??
http://128.242.141.111/index.cfm
Old 06-09-2004, 08:35 PM
  #4  
AcuraFanatic
Senior Member
Thread Starter
 
AcuraFanatic's Avatar
 
Join Date: Mar 2000
Location: Southern NH
Posts: 37,274
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by JimBlake
Sometimes they won't notice a bent rim unless they're looking for it??

Wheel spacers just change your track. I don't think they'll do any good for your vibration. Centering rings just help hold the wheel centered. The center hole is supposed to fit close around the raised part in the middle of the hub. When the lug nuts are tightened properly, I don't think that's your problem either.

Find a place with a Hunter GSP9700 (URL below), that can measure road-force variations while it's balancing your tires. Maybe the tire itself isn't quite right??
http://128.242.141.111/index.cfm
The rims and tires are brand spankin new but I'll see what I can do
Old 06-10-2004, 06:41 AM
  #5  
JimBlake
Senior Member
 
JimBlake's Avatar
 
Join Date: Jan 2003
Posts: 1,994
Likes: 0
Received 2 Likes on 1 Post
Default

OK I didn't realize they were really NEW. So ignore the bit about a bent rim...

But a tire with a carcass that's not quite round or straight, can be balanced perfectly when it's spinning in the air. Then when you put the weight of the car on it, it squirms around & feels like it's out of balance. That balancing machine does it's work while the tire is pressed against a roller. So if a tire is defective, that'll give you some credibility when you go make a warranty claim for the tire.
Old 06-13-2004, 06:22 AM
  #6  
honura
Seni
 
honura's Avatar
 
Join Date: Aug 2003
Location: N.Y. Queens
Posts: 3,401
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah check your tires. I had a bubble in one of mine and I had the same issues.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dolf
92+ Civic/EL & Del Sol
12
03-22-2004 08:44 PM
dom93hatch
The Basement
20
11-16-2003 05:23 PM
bigcarman
Parts Classifieds
10
08-20-2003 06:58 PM
Sadiztik-R
The Basement
5
07-05-2003 07:28 AM
wagon89
The Basement
23
06-09-2003 11:45 AM



Quick Reply: Nasty Shake



All times are GMT -8. The time now is 06:29 PM.