Simple wheel question,
04-24-2004, 01:49 AM
#1
HEAT:Shift_TechkaV
Thread Starter
Join Date: Mar 2004
Location: Altus AFB, OK
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Simple wheel question,
What's up guys, I have been looking for set of exel wheels lately,
I have 2002 Accord 4 lug, and so, i figured they have different diameters.
such as : 4x100, 4x114.3.. and so on.
what is the number that i want to look for? not sure, so help?
and one more, what's the engine code for my car?
2002 Accord LX 2.3 Vtec..Thanks!
I have 2002 Accord 4 lug, and so, i figured they have different diameters.
such as : 4x100, 4x114.3.. and so on.
what is the number that i want to look for? not sure, so help?
and one more, what's the engine code for my car?
2002 Accord LX 2.3 Vtec..Thanks!
04-24-2004, 03:17 AM
#2
THE RED 6th GEN Coupe
Join Date: Jun 2002
Location: Chicagoland, IL
Posts: 1,689
Likes: 0
Received 0 Likes
on
0 Posts
Simple Answer, use the search key for these topics we have covered them a million times....
Else: Wheels are 114.3 x 4 (4.5" x 4) don't go more the 42mm offset.
So that means 45mm is good, 40mm is bad.
Your engine is either F23A1 or F23A4 the number is on the engine block stamped down by the tranny in front near the manifold. If you engine is ULEV you have the F23A4.
Else: Wheels are 114.3 x 4 (4.5" x 4) don't go more the 42mm offset.
So that means 45mm is good, 40mm is bad.
Your engine is either F23A1 or F23A4 the number is on the engine block stamped down by the tranny in front near the manifold. If you engine is ULEV you have the F23A4.
Thread
Thread Starter
Forum
Replies
Last Post
oc_civic
92+ Civic/EL & Del Sol
43
11-23-2002 06:15 AM
