cooling fan problem
#1
eluded si
Thread Starter
Join Date: Feb 2004
Location: plymouth, wi
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
cooling fan problem
okay here's the problem...
i just put a h22a into my 94 prelude si this weekend. it started up great and everything works except when the car is running, the cooling fan doesn't run even with the heat on high. when i shut the car off, the fan kicks in and won't stop until i pull the relay. i don't know what's causing this. would anyone have any suggestions about it?
i just put a h22a into my 94 prelude si this weekend. it started up great and everything works except when the car is running, the cooling fan doesn't run even with the heat on high. when i shut the car off, the fan kicks in and won't stop until i pull the relay. i don't know what's causing this. would anyone have any suggestions about it?
#3
Registered User
Join Date: Jan 2004
Location: California
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
the fan wouldnt come on if you turn the heat to high...unless you turn your A/C on...turning the heat to high helps cool the motor down so the fan doesnt need to come on...
#4
Flaccid Member
Join Date: Jul 2002
Location: Seattle
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
since the car senses the motor temp after shutdown, it's likely your fan temp switch is bad. the temp switch is located at the head, under the dizzy if i remember correctly. this is what monitors coolant temp and signals to the fan relay.
#6
Flaccid Member
Join Date: Jul 2002
Location: Seattle
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ludeboom
i thought the fan switch was located on the radiator? either way, its definitely the fan/thermo switch
~boom
~boom
Thread
Thread Starter
Forum
Replies
Last Post
Geckoboy
Engine Swaps, Tech & Tuning
7
02-12-2004 12:19 PM
Meguel24
The Basement
5
10-23-2003 01:49 PM