DC JDM header
12-17-2003, 03:13 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Ontario, Canada
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to know if the DC header has enough ground clearance on my factory ride height r. I don't plan on ever lowering it, what for. Should I go with ceramic coated or stainless. I hear the ceramic is best, not to mention cheaper.
12-17-2003, 03:57 PM
#2
Senior Member
Join Date: Nov 2002
Location: OH
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I have that header on stock height, and im yet to have any scrapping of any sort. The stainless obviously looks nicer, but there is no difference in performance between the two... the ceramic will run a bit cooler due to the coating.
12-17-2003, 04:46 PM
#3
Member
Join Date: Dec 2003
Location: Las Vegas, NV
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Johnny T
Just wanted to know if the DC header has enough ground clearance on my factory ride height r. I don't plan on ever lowering it, what for. Should I go with ceramic coated or stainless. I hear the ceramic is best, not to mention cheaper.
12-18-2003, 12:16 PM
#4
Where's the DC5R???
Join Date: Nov 2002
Location: Central GA
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
i have the stainless JDM DC w/ an SMSP cat and i love it. The clearance is about 3-4mm below the oil pan so no biggie at all. The runners coming out of the header (from the head) are discolored as hell though. :cry:
12-18-2003, 09:24 PM
#6
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Ontario, Canada
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I should probably go with the real JDM header for reliability, but the price is a little high if you get the heatshields and do it properly. I guess I'll just chill until I spot a used one(unlikely).... Unless, anyone is willing to donate one? worth a shot.