Notices

A lot of people having trans/clutch/synchro probs.

Thread Tools
 
Old 03-24-2003, 05:13 PM
  #1  
Jan Niemi
Senior Member
Thread Starter
 
Jan Niemi's Avatar
 
Join Date: Nov 2002
Location: City of Boost
Posts: 612
Likes: 0
Received 0 Likes on 0 Posts
Default

It seems that there are quite a few posts on synchro grind, can't get it in gear, etc.

I had a similiar problem. 5th gear synchro grind, and tougher shifting than normal. I put a clutch (cm stage 3) in last summer, and when I did, I made 2 mistakes.
1) used non-Honda trans fluid
2) followed the owner's manual for capacity I think it was like 2.1 liters

This past weekend I finally drained the synthetic oil I had in the trans and replaced it with 3 quarts of Honda fluid. To my utter shock, there is absolutely no sign of 5th gear synchro grind, and shifting in general is absolutely spectacular!!

I caught the problem early, I only went about a 1000 miles with the grind, and I would drop the rpm to shift into 5th to prevent the grind. I am sure that had I waited, this remedy would probably not have helped, but you never know! I highly recommend using stock Honda fluid in the trans - forget all the hype, and just do the right thing!!
Old 03-24-2003, 05:23 PM
  #2  
kabob
Senior Member
 
kabob's Avatar
 
Join Date: Nov 2002
Location: Dallas, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
Default

Great post, Jan! I was thinking about switching my fluid to BG Synchroshift but I think I'll be sticking with the Honda fluid now
Old 03-24-2003, 05:35 PM
  #3  
canadaitr
Junior Member
 
canadaitr's Avatar
 
Join Date: Mar 2003
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Now for a real stupid question from a Canadian who is more accustomed to metric units. How many quarts is a liter?
Precisely 3 quarts=how many litres?

Thanks for your post. I have been having tranny problems that's been really bothering me.
Old 03-24-2003, 05:41 PM
  #4  
kabob
Senior Member
 
kabob's Avatar
 
Join Date: Nov 2002
Location: Dallas, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
Default

1 liter = 33.8 ounces so a little over 2 quarts per liter.
Old 03-24-2003, 09:19 PM
  #5  
Jan Niemi
Senior Member
Thread Starter
 
Jan Niemi's Avatar
 
Join Date: Nov 2002
Location: City of Boost
Posts: 612
Likes: 0
Received 0 Likes on 0 Posts
Default

Kabob, SON! Not quite. 1 quart is just under 1 liter. (.946)
Old 03-24-2003, 09:56 PM
  #6  
Aj
Senior Member
 
Aj's Avatar
 
Join Date: Sep 2002
Posts: 794
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah, and either way, when pouring tranny fluid, you should have the top plug open any way to drain any access, so it should matter. just pour till it comes out....

Later,
Aj
Old 03-25-2003, 01:31 PM
  #7  
kabob
Senior Member
 
kabob's Avatar
 
Join Date: Nov 2002
Location: Dallas, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Jan Niemi
Kabob, SON! Not quite. 1 quart is just under 1 liter. (.946)
Doh! I think the crack poked a hole in my brain where my mental conversion calculator resides :P
Old 06-08-2003, 07:19 AM
  #8  
mydc2200
Junior Member
 
mydc2200's Avatar
 
Join Date: Jun 2003
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

great post, after my run for a while till engine is hot enough trans too probably, 1st, 2nd gear start making noise i thought it was sincronz.
I'll replace oil trans to honda. thanks for your message
Old 06-09-2003, 07:00 AM
  #9  
Zodiac R279
Registered User
 
Zodiac R279's Avatar
 
Join Date: Jun 2003
Location: East Coast
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Default

I am glad to hear I am not the only one with this problem.

One thing I did a bit different was to use Lucas Transmission Fluid additive. You can add it to your Favorite MTF or ATF. this stuff is Soooo good I didn't use Honda MTF (just didn't know about it) so I used a little Lucas and the rest (up to 2.3 quarts) of 10w30 (as per haynes manual)
Anyway at first this helped the problem and the Tranny was quiet, BUT after the Tranny heated up the noise returned :x
After reading a post Here saying that 3 quarts was a better amount I added some more Lucas via the Speed Sensor hole on the top of the tranny. Low and Behold... I drove the car 300 miles running about 80-100 Mph and the Tranny is just as quiet as it was when it was cold. The tranny pulls different as well like it grabs better.
Old 06-09-2003, 02:46 PM
  #10  
PY-ITR1246
Member
 
PY-ITR1246's Avatar
 
Join Date: Apr 2003
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default

i kind of ahve a similar problem, when im going from second to third in normal driving i have no problem, but if the rpm's are above 6000 i get a lil grind when i put it in gear. there is no problem puting it in gear but if i do go above 6000 rpm i have to let them drop to below that point.

the car is under warrenty so im going to go the dealer to get them to take care of it ( the cars like a month and a half old), or is this something that i can take care of myself.
thanks in advance



All times are GMT -8. The time now is 03:43 PM.