get to rebuild the tranny
12-05-2003, 06:01 PM
#1
Banned
Thread Starter
Join Date: May 2003
Location: Tampa, FL
Posts: 4,058
Likes: 0
Received 0 Likes
on
0 Posts
get to rebuild the tranny
so my 3rd and 4th gear synchros are off. I picked up the 3rd and 4th gear set today from Acura. It was cheaper than I thought, but not as cheap as I hoped :happysad:
When I get done with that, I was going to beef up the motor by buying the Type R head, Toda internals, and getting the block bored out to 82mm (1.9 liter), but I dont know. I really want to do suspension and that's gonna be cheaper. I guess I'll read up some of the older posts in here for suggestions on suspension.
I need a part and if someone has it, it would help me out. I need one of those little white plastic pieces used to stop the window from going up to far. You'll find 2 per door on the inside if you take off the panel. It'll easily fit in an envelope. Can anyone hook me up? I'll gladly throw a few bucks your way. Thanks. :thumbup:
When I get done with that, I was going to beef up the motor by buying the Type R head, Toda internals, and getting the block bored out to 82mm (1.9 liter), but I dont know. I really want to do suspension and that's gonna be cheaper. I guess I'll read up some of the older posts in here for suggestions on suspension.
I need a part and if someone has it, it would help me out. I need one of those little white plastic pieces used to stop the window from going up to far. You'll find 2 per door on the inside if you take off the panel. It'll easily fit in an envelope. Can anyone hook me up? I'll gladly throw a few bucks your way. Thanks. :thumbup:
12-05-2003, 06:23 PM
#6
Banned
Thread Starter
Join Date: May 2003
Location: Tampa, FL
Posts: 4,058
Likes: 0
Received 0 Likes
on
0 Posts
Basically I'm planning on this: http://cgi.ebay.com/ebaymotors/ws/eB...tem=2446791787
installed into this:http://cgi.ebay.com/ebaymotors/ws/eB...tem=2447121355
I'm planning that as the final product for the top end of the motor. As far as the block goes, I was hoping to increase the displacement, and throw in some aftermarket pistons, perhaps Endynes? I know little about engines themselves. Whatchew thinks for my all motor setup?
installed into this:http://cgi.ebay.com/ebaymotors/ws/eB...tem=2447121355
I'm planning that as the final product for the top end of the motor. As far as the block goes, I was hoping to increase the displacement, and throw in some aftermarket pistons, perhaps Endynes? I know little about engines themselves. Whatchew thinks for my all motor setup?
12-05-2003, 07:45 PM
#10
Banned
Thread Starter
Join Date: May 2003
Location: Tampa, FL
Posts: 4,058
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Snoopy
you cant go wrong with toda. the b's are a great midrange cam with power up top as well from what i hear.
why the itr head?
you cant go wrong with toda. the b's are a great midrange cam with power up top as well from what i hear.
why the itr head?