Notices

How much transmission fluid to fill tranny?

Thread Tools
 
Old 12-03-2003, 09:27 PM
  #1  
honda1998civic
Senior Member
Thread Starter
 
honda1998civic's Avatar
 
Join Date: Nov 2003
Posts: 312
Likes: 0
Received 0 Likes on 0 Posts
Default How much transmission fluid to fill tranny?

Would anyone happen to know how much transmission fluid a 98 civic lx manual transmission would take to fill up tranny?
Old 12-03-2003, 09:47 PM
  #2  
93HybridCX
Beast from the East
 
93HybridCX's Avatar
 
Join Date: Sep 2003
Location: VA
Posts: 2,705
Likes: 0
Received 0 Likes on 0 Posts
Default

:thinking: .............. I think it is just under 2 quarts.
Old 12-03-2003, 10:18 PM
  #3  
supermac88
not OG but Old School
 
supermac88's Avatar
 
Join Date: Apr 2003
Location: Decatur, IN
Posts: 1,998
Likes: 0
Received 0 Likes on 0 Posts
Default

I think it is right at 2 quarts at least that is what Chiltons says
Old 12-03-2003, 11:11 PM
  #4  
Technodigifreak
Hot-Modder
 
Technodigifreak's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
Default

its actually like 1.5qts but just fill until it runs out of the "level check/fill" hole
Old 12-04-2003, 11:10 AM
  #5  
honda1998civic
Senior Member
Thread Starter
 
honda1998civic's Avatar
 
Join Date: Nov 2003
Posts: 312
Likes: 0
Received 0 Likes on 0 Posts
Default

would i need a new washer for fill hole or can i use the old one?
Old 12-04-2003, 12:26 PM
  #6  
NeverBX
Snootchie Bootchies!!
 
NeverBX's Avatar
 
Join Date: Dec 2002
Location: Hawaii
Posts: 2,013
Likes: 0
Received 0 Likes on 0 Posts
Default

its best to use a new one.
Old 12-04-2003, 03:37 PM
  #7  
Jafro
I'm made of meat!
 
Jafro's Avatar
 
Join Date: Mar 2003
Location: Richmond, VA
Posts: 3,580
Likes: 0
Received 0 Likes on 0 Posts
Default

Servicing the transmission takes a little less than filling a totally empty one. Just like coolant systems, and engine oil.

1.5qts if you're just servicing it, and 1.8-1.9qts if it's a bone dry transmission.
Old 12-04-2003, 04:16 PM
  #8  
honda1998civic
Senior Member
Thread Starter
 
honda1998civic's Avatar
 
Join Date: Nov 2003
Posts: 312
Likes: 0
Received 0 Likes on 0 Posts
Default

can i get a washer for fill hole at local auto part store or only from honda? is it same washer as drain hole?
Old 12-04-2003, 04:21 PM
  #9  
Jafro
I'm made of meat!
 
Jafro's Avatar
 
Join Date: Mar 2003
Location: Richmond, VA
Posts: 3,580
Likes: 0
Received 0 Likes on 0 Posts
Default

If it's a copper crush washer, you can get them at Lowe's or Home Depot in the plumbing section. If it's an aluminum washer, I've block sanded them with 400 grit, and re-used them (as long as they weren't distorted to start out with) and never had any problems.

Edit: My local Pep Boy's has them on the aisle with the HELP products. Most auto parts stores should carry them, too.




All times are GMT -8. The time now is 08:04 AM.