lower headrest
12-03-2003, 07:34 AM
#1
mcc racing
Thread Starter
Join Date: Jun 2002
Location: Southern New Jersey
Posts: 3,264
Likes: 0
Received 0 Likes
on
0 Posts
lower headrest
im sure that about no one on here cares.. but the ONE thing i hated about my gsr (or any stock seat) is the lame little metal posts from the seats to the headrest.. and in the gsr seats there is no way to make the headrest sit flush with the seat (withouts modding it) the reson is the first clicky part in the post is in a position that is too high so all i did was messure the post and cut a new slot to lock the rest into.. now the headrest locks flush with the top of the seat
12-03-2003, 04:13 PM
#6
mcc racing
Thread Starter
Join Date: Jun 2002
Location: Southern New Jersey
Posts: 3,264
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Outxider
i still dont get what u did? the head rest of a gsr seat would sit flush, cuz i had em. like the metal rods thingy isnt showin? pics?
i still dont get what u did? the head rest of a gsr seat would sit flush, cuz i had em. like the metal rods thingy isnt showin? pics?
12-03-2003, 04:57 PM
#7
CockBlockerator
Join Date: May 2002
Location: philly pa
Posts: 1,771
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by oc_civic
yes.. there is not metal showing.. if you go look at a set.. and you push the headresh flush with the seat, it looks good.. but then if you pull it or move the wrong way.. it will slide back up (to the first lock position) which are the little grooves on the metal posts.. i simply measured and added another notch.. so it locks flush with the top of the seat
yes.. there is not metal showing.. if you go look at a set.. and you push the headresh flush with the seat, it looks good.. but then if you pull it or move the wrong way.. it will slide back up (to the first lock position) which are the little grooves on the metal posts.. i simply measured and added another notch.. so it locks flush with the top of the seat
only if you're short
h:
12-03-2003, 05:05 PM
#8
X-Motoring
Join Date: Nov 2000
Location: bay area
Posts: 2,530
Likes: 0
Received 0 Likes
on
0 Posts
ahh i c. so now it wont move. good idea. :goodjob:
Originally posted by oc_civic
yes.. there is not metal showing.. if you go look at a set.. and you push the headresh flush with the seat, it looks good.. but then if you pull it or move the wrong way.. it will slide back up (to the first lock position) which are the little grooves on the metal posts.. i simply measured and added another notch.. so it locks flush with the top of the seat
yes.. there is not metal showing.. if you go look at a set.. and you push the headresh flush with the seat, it looks good.. but then if you pull it or move the wrong way.. it will slide back up (to the first lock position) which are the little grooves on the metal posts.. i simply measured and added another notch.. so it locks flush with the top of the seat
12-04-2003, 07:12 AM
#9
mcc racing
Thread Starter
Join Date: Jun 2002
Location: Southern New Jersey
Posts: 3,264
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Outxider
ahh i c. so now it wont move. good idea. :goodjob:
ahh i c. so now it wont move. good idea. :goodjob:
