draggin

ok, i have a 00 civic si. the clutch squeaks when pressing and releasing the clutch pedal. i have already lubricated the slave cylinder where it engages the release fork, but it did not solve the problem. i am thinking it must be that the release fork itself may need lubrication or the release fork bolt. is this correct? is there anyway to lubricating these parts w/o taking the tranny apart? any help would be appreciated.
thanks.

93HybridCX

Sounds like your throw out bearing

draggin

how many hours am i looking at?

93HybridCX

You might as well put a new clutch in it while you are doing it..... so I say 3-4 hours tops.

draggin

doesnt sound like a nightmare. thank for the help!

93HybridCX

Anytime, its not that bad but time consuming since you have to pull the tranny

Black2000Si

I have the same problem in my Si

Import-Tooner

You should be able to pull your tranny pretty easily. The ball that the clutch fork pivots on may just need to be greased. But I would get an aftermarket clutch while you're in there. And replace the throw out bearing. If you don't race your car or don't have many mods then the oe clutch is probably fine.